CO2-Assisted Catalytic Pyrolysis of Mixed Polyolefin Waste over Mesoporous Ga/ZSM-5: Integrating Response Surface Optimization with CFD-Based Transport Analysis
Authors:
- Snunkhaem EcharojSESnunkhaem Echaroj
- Nattadon PannucharoenwongNPNattadon Pannucharoenwong
- Keyoon DuanguppamaKDKeyoon Duanguppama
- Tanatorn TanantongTTTanatorn Tanantong
- Kumpanat ChaiphetKCKumpanat Chaiphet
- Aphichon MungchuAMAphichon Mungchu
- Phadungsak RatanadechoPRPhadungsak Ratanadecho
Preprint
- 27 August 2026
- preprint
- Published by Elsevier in SSRN Electronic Journal
Abstract
In this research work, CO2 assisted catalytic co-pyrolysis of a 50:50 blend of waste polyolefin plastic (PP/PE) and biomass (Napier grass) by employing mesoporous Ga/ZSM 5 catalyst and associated techniques, such as catalyst characterization, computational fluid dynamics simulations, and Box-Behnken optimization was studied. The findings obtained from X-ray diffraction showed that the MFI structure remained intact and crystalline Ga2O3 was not formed. From the results obtained via scanning electron microscope and energy dispersive spectroscopy, it was concluded that gallium was uniformly dispersed and hexagonal shape of the catalyst did not change. According to NH3 temperature programmed desorption, the acidity of the catalyst changed. Strong Brønsted sites decreased from 0.361 to 0.201 mmol g−1 and medium strength Lewis sites increased to 0.225 mmol g−1, whereas total acidity stayed almost constant (0.662–0.692 mmol g−1). The catalytic process allowed for increasing the transfer of heat, leading to 25–125 °C increase in reactor temperatures, and radial temperature gradients dropped from about 600 °C to 350-450 °C. As CO2 concentration (0–30 vol.%) increases, the particle Reynolds number drops from 9.87 to 7.61, indicating a transition towards diffusion-controlled transport. The application of response surface methodology shows that bio oil yields range from 44.7 to 65.7 wt.%, with the highest yield of 65.7 wt.% being achieved at 503.1 °C, 1.95 wt.% Ga loading over ZSM-5 and 22.5 vol.% CO2 (R2 = 0.986). The validation experiments confirm an average yield of 65.68 ± 0.38%.Keywords
This publication has 12 references indexed in Scilit:
- Co-pyrolysis of biomass and plastic waste into carbon materials with environmental applications: a critical reviewGreen Chemistry, 2025
- Tailoring Olefin Contents Formation during Waste Plastic PyrolysisACS Applied Polymer Materials, 2024
- Box Behnken design application for optimization of bio-oil yield from catalytic pyrolysis of agro-residueFuel Communications, 2023
- Response Surface Methodology Analysis of Pyrolysis Reaction Rate Constants for Predicting Efficient Conversion of Bulk Plastic Waste into Oil and Gaseous FuelsEnergies, 2022
- Relationship between ZSM-5 pore modifications and gallium proximity and liquid hydrocarbon number distribution from ethanol oligomerizationCatalysis Science & Technology, 2022
- Emerging analytical methods to characterize zeolite-based materialsNational Science Review, 2022
- Ethylene Dehydroaromatization over Ga‐ZSM‐5 Catalysts: Nature and Role of Gallium SpeciationAngewandte Chemie International Edition, 2020
- CO 2 -Assisted propane aromatization over phosphorus-modified Ga/ZSM-5 catalystsCatalysis Science & Technology, 2020
- Catalytic Fast Pyrolysis of Kraft Lignin With Conventional, Mesoporous and Nanosized ZSM-5 Zeolite for the Production of Alkyl-Phenols and AromaticsFrontiers in Chemistry, 2018
- Characterization of Isolated Ga3+ Cations in Ga/H-MFI Prepared by Vapor-Phase Exchange of H-MFI Zeolite with GaCl3ACS Catalysis, 2018