A model incorporating the effects of flow type on fiber orientation for flows with mixed flow kinematics
Authors:
- 1 May 2019
- journal article
- research article
- Published by Society of Rheology in Journal of Rheology
- Vol. 63 (3) , 455-464
Abstract
Reliable predictions of the fiber orientation profile generated during processing are important for the improvement of mold design and processing conditions to optimize mechanical properties of the as-formed composites. To better reflect slower orientation evolution observed experimentally in shear flow dominated regions, various models were developed with a scalar strain-reduction factor (SRF). Normally, this scalar factor is obtained by fitting to orientation data in simple shear flow. However, during polymer processes such as injection molding, the flow types, including extensional, simple shear, rotational flow, and mixed flows, have a significant impact on fiber orientation kinematics. Nonlubricated squeeze flow (NLSF) is replicated through a rectangular channel, in order to simulate industrial polymer processing. This is accomplished because both shear and extensional flows are present. However, unlike industrial processes such as injection molding, the flow is well controlled, resulting in less fib...Keywords
This publication has 26 references indexed in Scilit:
- Prediction of Young’s Modulus for Injection Molded Long Fiber Reinforced ThermoplasticsJournal of Composites Science, 2018
- From dilute to entangled fibre suspensions involved in the flow of reinforced polymers: A unified frameworkJournal of Non-Newtonian Fluid Mechanics, 2017
- Fiber orientation evolution in simple shear flow from a repeatable initial fiber orientationJournal of Non-Newtonian Fluid Mechanics, 2016
- Fiber orientation in the frontal region of a center-gated disk: Experiments and simulationJournal of Non-Newtonian Fluid Mechanics, 2015
- Evolution of fibre orientation in radial direction in a center-gated disk: Experiments and simulationComposites Part A: Applied Science and Manufacturing, 2013
- Fiber Length and Orientation in Long-Fiber Injection-Molded Thermoplastics — Part I: Modeling of Microstructure and Elastic PropertiesJournal of Composite Materials, 2008
- LFTs for automotive applicationsReinforced Plastics, 2005
- Rheology of sheared flexible fiber suspensions via fiber-level simulationsJournal of Rheology, 2003
- Orientational dispersion of fibers in extensional flowsPhysics of Fluids A: Fluid Dynamics, 1990
- The motion of ellipsoidal particles immersed in a viscous fluidProceedings of the Royal Society of London. Series A, Containing Papers of a Mathematical and Physical Character, 1922