Biosurfactant Enhanced Saturated Pool Boiling Heat Transfer Over Plain Copper Surface and Prediction Through Machine Learning Algorithms
- 13 February 2025
- journal article
- Published by Wiley in Heat Transfer
- Vol. 54 (4) , 2559-2571
Abstract
This study investigates the impact of coco glucoside, a bio‐surfactant, on heat transfer during pool boiling experiments with acetone, methanol, and ethanol using a smooth copper surface. Solutions containing coco glucoside were tested at concentrations of 0.5, 1, and 1.5 mL per 100 mL of fluid (500, 1000, and 1500 ppm). The research focused on heat transfer coefficients (HTC), bubble formation, and surface temperatures to assess how coco glucoside influences heat transfer efficiency. The results are presented in terms of wall superheat and boiling HTC with respect to heat flux and concentration of coco‐glucoside. The results indicate that coco glucoside enhances heat transfer efficiency in acetone and methanol when used at concentrations up to 1000 ppm. Specifically, the maximum HTC observed at the 1 mL concentration of surfactant was 12,121 W/m²K for acetone and 8185 W/m²K for methanol, representing improvements of 11% and 26%, respectively, compared to pure liquids. These improvements are attributed to lower surface tension and enhanced bubble nucleation. However, at a concentration of 1500 ppm, a decrease in HTC was noted, likely due to micelle formation. In contrast, ethanol exhibited a continuous increase in HTC with rising coco glucoside concentration, achieving a 35% improvement at 1500 ppm. Additionally, the study explored predicting HTC using machine learning algorithms. K‐nearest neighbors (KNNs) and random forest models were evaluated. KNN achieved an R² of 0.9895 and a mean absolute percentage error (MAPE) of 7.495% for acetone, while random forest (RF) showed an R² of 0.9785 and a MAPE of 12.01% for ethanol. These findings demonstrate the potential of coco glucoside in improving heat transfer and the effectiveness of machine learning in optimizing thermal management processes.Keywords
This publication has 24 references indexed in Scilit:
- Advances in the application of machine learning to boiling heat transfer: A reviewInternational Journal of Heat and Fluid Flow, 2024
- A machine learning based approach for predicting Pool boiling heat transfer coefficient of CNT + GO nanoparticle coated surfacesInternational Communications in Heat and Mass Transfer, 2024
- A novel surfactant material for performance enhancement on nucleate pool boiling heat transferInternational Communications in Heat and Mass Transfer, 2023
- Applications of machine learning methods for boiling modeling and prediction: A comprehensive reviewChemical Thermodynamics and Thermal Analysis, 2022
- Comparison of pool boiling heat transfer performance between aqueous cationic and anionic surfactant solutions with similar ionic groupApplied Thermal Engineering, 2022
- Surface qualitative analysis and ANN modelling for pool boiling heat transfer using Al2O3-water based nanofluidsColloids and Surfaces A: Physicochemical and Engineering Aspects, 2021
- Prediction of pool boiling heat transfer coefficient for various nano-refrigerants utilizing artificial neural networksJournal of Thermal Analysis and Calorimetry, 2019
- Enhancement of pool boiling heat transfer using innovative non-ionic surfactant on a wire heaterExperimental Thermal and Fluid Science, 2017
- Pool boiling enhancement with environmentally friendly surfactant additivesJournal of Thermal Analysis and Calorimetry, 2014
- Boiling enhancement with environmentally acceptable surfactantsInternational Journal of Heat and Fluid Flow, 2004