Quench Protection Design of a Head-Only 1.5 T MRI Superconducting Magnet
- 8 January 2024
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 34 (5) , 1-5
Abstract
This article presents a quench protection design of a head-only 1.5 T MRI superconducting magnet with bath-cooling in Wuhan National High Magnetic Field Center (WHMFC). The magnet consists of nine coaxial solenoid coils fabricated with NbTi wire with a copper to non-copper ratio of eight. It operates at around 510 A with a total storage energy of 0.59 MJ. A passive quench protection circuit with a heater network is employed to protect the magnet from damage during the quench event. The quench protection circuit consists of a set of diodes and a heater network. The diode assembly is composed of two groups of two diodes connected in series and then reverse-parallel. The heater network is composed of 18 heaters connected in parallel and each coil's surface is glued with two heaters arranged at 0° and 180°, respectively. Different quench scenarios are simulated and analyzed, and the simulation results show that the quench protection circuit can effectively protect this magnet from damage.Keywords
Funding Information
- National Natural Science Foundation of China (52293422, U21A20458, 51821005)
- National Key Research and Development Plan Project of China (2021YFA1600301)
This publication has 14 references indexed in Scilit:
- Systematic analysis of the quench process performance and simulation of the 9.4 T-800 mm whole-body MRI magnetSuperconductor Science and Technology, 2023
- Multi-physics modelling of quench in a superconducting magnet using bond graphPhysica C: Superconductivity and its Applications, 2022
- Niobium-titanium (Nb-Ti) superconducting joints for persistent-mode operationScientific Reports, 2019
- Persistent current joints between technological superconductorsSuperconductor Science and Technology, 2015
- Quench Simulation for 9.4 T MRI Superconducting MagnetJournal of Physics: Conference Series, 2014
- Structural Design of a 9.4 T Whole-Body MRI Superconducting MagnetIEEE Transactions on Applied Superconductivity, 2012
- Iseult/INUMAC Whole Body 11.7 T MRI Magnet StatusIEEE Transactions on Applied Superconductivity, 2010
- Case Studies in Superconducting Magnets2009
- Quench Detection and Protection of the Wide Bore 900 MHz NMR Magnet at the National High Magnetic Field LaboratoryIEEE Transactions on Applied Superconductivity, 2004
- Quench simulation and thermal diffusion in epoxy-impregnated magnet systemIEEE Transactions on Applied Superconductivity, 1995