Mechanical and thermal properties of poly(lactic acid)/sugarcane bagasse fiber green composites
Authors:
- 22 November 2015
- journal article
- research article
- Published by SAGE Publications in Journal of Thermoplastic Composite Materials
- Vol. 30 (8) , 1091-1102
Abstract
Poly(lactic acid)/sugarcane bagasse fiber (PLA/SCBF) composites were prepared using melt compounding followed by compression molding. Epoxidized soybean oil (ESO) was selected as plasticizer for the PLA/SCBF composites. SCBF was alkali-treated and ground into powder form with the size of approximately 100 μm (hereafter designated as SCBFP). The properties of the PLA composites were assessed using impact tests, field-emission scanning electron microscopy, and dynamic mechanical analysis (DMA). DMA results showed that the addition of SCBF increased the storage modulus of PLA and the effect is more pronounced for the one containing SCBFP. The impact strength of PLA/SCBF composites was improved significantly by the addition of ESO.Keywords
This publication has 21 references indexed in Scilit:
- The development and comparison of bio-thermoset plastics from epoxidized plant oilsIndustrial Crops and Products, 2012
- Chemical and morphological characterization of sugarcane bagasse submitted to a delignification process for enhanced enzymatic digestibilityBiotechnology for Biofuels, 2011
- Comparison of injection moulded, natural fibre-reinforced composites with PP and PLA as matricesJournal of Thermoplastic Composite Materials, 2011
- The Effects of Thermal History on Tensile Properties of Poly(vinyl chloride) and its Composite with Sugarcane BagasseJournal of Thermoplastic Composite Materials, 2011
- Characterisation of solution cast cellulose nanofibre – reinforced poly(lactic acid)Express Polymer Letters, 2010
- Phase Inversion in Polylactide/Soybean Oil Blends Compatibilized by Poly(isoprene-b-lactide) Block CopolymersACS Applied Materials & Interfaces, 2009
- Development of green composite consists of woodchips, bamboo fibers and biodegradable adhesiveComposites Part B: Engineering, 2009
- Impact and tensile properties of PLA/Cordenka and PLA/flax compositesComposites Science and Technology, 2008
- Effect of fiber surface-treatments on the properties of laminated biocomposites from poly(lactic acid) (PLA) and kenaf fibersComposites Science and Technology, 2008
- Natural fibres as reinforcement in polylactic acid (PLA) compositesComposites Science and Technology, 2003