Optimizing Fog Collector Performance Through Fog Droplet-Size Distribution
Authors:
- 26 August 2026
- journal article
- Published by ASME International in Journal of Fluids Engineering
- Vol. 148 (12)
Abstract
Fog harvesting is a sustainable approach for potable-water supply in fog-prone coastal and elevated regions, but its fog-capture efficiency (ηcap) depends strongly on droplet-size distribution, mesh geometry, and wind speed. This study uses Eulerian–Lagrangian simulations to examine the effects of fog-mesh wire diameter (df 0.2–1.0 mm), shade coefficient (SC = 0.3–0.7), and freestream velocity (2–5 m s−1) on the capture of droplets with diameters from 2 to 40 μm. To interpret the results in a transferable form, droplet behavior is organized by Stokes number into three regimes: regime 1 (low-St and streamline-following droplets with weak capture), regime 2 (intermediate-St droplets that are highly sensitive to mesh geometry and aerodynamics), and regime 3 (high-St droplets dominated by inertial impaction). Large droplets show the highest instantaneous capture across most cases, whereas intermediate droplets govern the sensitivity to SC, df, and U. Fine and intermediate wires (df = 0.2–0.6 mm) with SC close to 0.6 provide the best balance between geometric interception and aerodynamic permeability. Increasing velocity enhances impaction until wake formation and flow diversion limit additional gain. The results are interpreted using a nondimensional framework, based on the droplet Stokes number, mesh-fiber Reynolds number, pressure-drop coefficient, and shade coefficient. The reported fog-capture efficiency (ηcap) values should be interpreted as the dry-mesh capture efficiencies (instantaneous capture at the onset of fogging, or under lean fog loading) since the current study excludes the dynamic impact of prolonged wetting, liquid deposition and growth on the fibers, mesh pore-clogging, and droplet re-entrainment effects. Notwithstanding, the current analysis effectively identifies a desirable design window corresponding to intermediate Stokes numbers, moderate-to-high aerodynamic permeability, and SC = 0.6.Keywords
This publication has 25 references indexed in Scilit:
- Fog water collection of harp-like single smooth and texturized filaments under field conditionsJournal of Hydrology, 2024
- Early stages of agglomeration of adhesive particles in fully-developed turbulent pipe flowsInternational Journal of Multiphase Flow, 2018
- Collection efficiency of fog eventsAtmospheric Research, 2018
- The design of an optimal fog water collector: A theoretical analysisAtmospheric Research, 2016
- A Numerical Study of Sea-Fog Formation over Cold Sea Surface Using a One-Dimensional Turbulence Model Coupled with the Weather Research and Forecasting ModelBoundary-Layer Meteorology, 2012
- Aerodynamic collection efficiency of fog water collectorsAtmospheric Research, 2011
- Reverse osmosis desalination: Water sources, technology, and today's challengesWater Research, 2009
- Discrete-element modeling of particulate aerosol flowsJournal of Computational Physics, 2009
- Precipitation scavenging of atmospheric aerosols for emergency response applications: testing an updated model with new real-time dataAtmospheric Environment, 2004
- The rosin—rammler size distribution for liquid droplet ensemblesJournal of Aerosol Science, 1983