Ashoke De
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Ashoke De has a total of 115 co-authors. Here are the top co-authors by number of shared publications:
- Dhairyadhar Bhelave
Department of Aerospace Engineering, Indian Institute of Technology Kanpur, Kanpur 208016, India
7 shared publications - Mayank Verma
Department of Aerospace Engineering, Indian Institute of Technology Kanpur 1 , Kanpur 208016, India
7 shared publications - Mohammed Ibrahim Sugarno
Indian Institute of Technology Kanpur
7 shared publications - Abhishek Sharma
Department of Space, Indian Space Research Organisation, Trivandrum, India
6 shared publications Mayank Verma
6 shared publicationsAlok Mishra
Department of Aerospace Engineering, Indian Institute of Technology Kanpur, 208016, Kanpur, India
5 shared publications
Latest Publications
- 26 August 2026
- Published by ASME International in Journal of Fluids Engineering
- Vol. 148 (12)
Optimizing Fog Collector Performance Through Fog Droplet-Size Distribution
Fog harvesting is a sustainable approach for potable-water supply in fog-prone coastal and elevated regions, but its fog-capture efficiency (ηcap) depends strongly on droplet-size distribution, mesh geometry, and wind speed. This study uses Eulerian–Lagrangian simulations to examine the effects of fog-mesh wire diameter (df 0.2–1.0 mm), shade coefficient (SC = 0.3–0.7), and freestream velocity (2–5 m s−1) on the capture of droplets with diameters from 2 to 40 μm. To interpret the results in a transferable form, droplet behavior is organized by Stokes number into three regimes: regime 1 (low-St and streamline-following droplets with weak capture), regime 2 (intermediate-St droplets that are highly sensitive to mesh geometry and aerodynamics), and regime 3 (high-St droplets dominated by inertial impaction). Large droplets show the highest instantaneous capture across most cases, whereas intermediate droplets govern the sensitivity to SC, df, and U. Fine and intermediate wires (df = 0.2–0.6 mm) with SC close to 0.6 provide the best balance between geometric interception and aerodynamic permeability. Increasing velocity enhances impaction until wake formation and flow diversion limit additional gain. The results are interpreted using a nondimensional framework, based on the droplet Stokes number, mesh-fiber Reynolds number, pressure-drop coefficient, and shade coefficient. The reported fog-capture efficiency (ηcap) values should be interpreted as the dry-mesh capture efficiencies (instantaneous capture at the onset of fogging, or under lean fog loading) since the current study excludes the dynamic impact of prolonged wetting, liquid deposition and growth on the fibers, mesh pore-clogging, and droplet re-entrainment effects. Notwithstanding, the current analysis effectively identifies a desirable design window corresponding to intermediate Stokes numbers, moderate-to-high aerodynamic permeability, and SC = 0.6.
- 26 August 2026
- Published by ASME International in Journal of Fluids Engineering
- Vol. 148 (12)
Optimizing Fog Collector Performance Through Fog Droplet-Size Distribution
Fog harvesting is a sustainable approach for potable-water supply in fog-prone coastal and elevated regions, but its fog-capture efficiency (ηcap) depends strongly on droplet-size distribution, mesh geometry, and wind speed. This study uses Eulerian–Lagrangian simulations to examine the effects of fog-mesh wire diameter (df 0.2–1.0 mm), shade coefficient (SC = 0.3–0.7), and freestream velocity (2–5 m s−1) on the capture of droplets with diameters from 2 to 40 μm. To interpret the results in a transferable form, droplet behavior is organized by Stokes number into three regimes: regime 1 (low-St and streamline-following droplets with weak capture), regime 2 (intermediate-St droplets that are highly sensitive to mesh geometry and aerodynamics), and regime 3 (high-St droplets dominated by inertial impaction). Large droplets show the highest instantaneous capture across most cases, whereas intermediate droplets govern the sensitivity to SC, df, and U. Fine and intermediate wires (df = 0.2–0.6 mm) with SC close to 0.6 provide the best balance between geometric interception and aerodynamic permeability. Increasing velocity enhances impaction until wake formation and flow diversion limit additional gain. The results are interpreted using a nondimensional framework, based on the droplet Stokes number, mesh-fiber Reynolds number, pressure-drop coefficient, and shade coefficient. The reported fog-capture efficiency (ηcap) values should be interpreted as the dry-mesh capture efficiencies (instantaneous capture at the onset of fogging, or under lean fog loading) since the current study excludes the dynamic impact of prolonged wetting, liquid deposition and growth on the fibers, mesh pore-clogging, and droplet re-entrainment effects. Notwithstanding, the current analysis effectively identifies a desirable design window corresponding to intermediate Stokes numbers, moderate-to-high aerodynamic permeability, and SC = 0.6.
- 1 July 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (7)
Beyond the mean-flow: A spectral-dynamic approach to unraveling the physics of droplet capture in fog harvesting meshes
Fog harvesting efficiency with mesh collectors is governed by complex interactions between droplet inertia and geometry-induced flow structures. Although previous studies have primarily relied on mean-flow metrics, the present work introduces a spectral-dynamic framework to examine an important but often overlooked control on droplet capture. A two-way coupled Eulerian–Lagrangian model is used to simulate droplet–laden flow (2–40 μm) across five representative mesh geometries. The results show that capture efficiency correlates not only with the magnitude of velocity fluctuations, but also with their spectral distribution and persistence. Frequency-domain analysis indicates that mesh geometry redistributes fluctuation energy across pore and obstruction regions, thereby defining a characteristic flow timescale. By comparing this flow timescale with the droplet response time, a dynamic matching parameter, Π=droplet response time/flow time scale, is introduced. The highest capture efficiency occurs when Π is order unity, corresponding to sustained droplet-flow interaction in the near-mesh region. Geometries that generate broadband, moderately amplified spectral content (e.g., triangular mesh) increase droplet residence time and interception probability, whereas geometries with either weak or highly localized fluctuations reduce performance through insufficient forcing or premature bypass. A physics-inspired correlation for capture efficiency is proposed based on this condition. The study therefore provides mechanistic design guidance, rather than a definitive optimum, for geometry optimization in fog-harvesting meshes.
- 1 July 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (7)
Beyond the mean-flow: A spectral-dynamic approach to unraveling the physics of droplet capture in fog harvesting meshes
Fog harvesting efficiency with mesh collectors is governed by complex interactions between droplet inertia and geometry-induced flow structures. Although previous studies have primarily relied on mean-flow metrics, the present work introduces a spectral-dynamic framework to examine an important but often overlooked control on droplet capture. A two-way coupled Eulerian–Lagrangian model is used to simulate droplet–laden flow (2–40 μm) across five representative mesh geometries. The results show that capture efficiency correlates not only with the magnitude of velocity fluctuations, but also with their spectral distribution and persistence. Frequency-domain analysis indicates that mesh geometry redistributes fluctuation energy across pore and obstruction regions, thereby defining a characteristic flow timescale. By comparing this flow timescale with the droplet response time, a dynamic matching parameter, Π=droplet response time/flow time scale, is introduced. The highest capture efficiency occurs when Π is order unity, corresponding to sustained droplet-flow interaction in the near-mesh region. Geometries that generate broadband, moderately amplified spectral content (e.g., triangular mesh) increase droplet residence time and interception probability, whereas geometries with either weak or highly localized fluctuations reduce performance through insufficient forcing or premature bypass. A physics-inspired correlation for capture efficiency is proposed based on this condition. The study therefore provides mechanistic design guidance, rather than a definitive optimum, for geometry optimization in fog-harvesting meshes.
- Open Access
- 3 November 2025
- Published by Springer Nature in The European Physical Journal Special Topics
- Vol. 234 (23) , 6653-6657
Advancement in computational fluid mechanics: bridging theory and application
- 3 November 2025
- Published by Springer Nature in The European Physical Journal Special Topics
- Vol. 234 (23) , 6653-6657
Open AccessAdvancement in computational fluid mechanics: bridging theory and application
- 30 October 2025
- Published by Springer Nature
- p. 275-283
Numerical Modeling and Validation of Droplet Behavior in Fluid Flow: Insights into Collision Efficiency Through Stokes Number
- 30 October 2025
- Published by Springer Nature
- p. 275-283
Numerical Modeling and Validation of Droplet Behavior in Fluid Flow: Insights into Collision Efficiency Through Stokes Number
- Open Access
Sub-cavity Induced Passive Control of Confined Supersonic Cavity Flows Across Varying Freestream Mach Numbers
The self-sustaining oscillations in cavity flows enhance fluid mixing and promote energy and momentum transport. However, the associated oscillation frequencies can amplify acoustic loading, potentially damaging surrounding structures. Hence, understanding cavity dynamics across geometries and freestream conditions and developing strategies to regulate these oscillations without compromising performance are essential. This study examines the influence of sub-cavities placed at the front and aft walls of a cavity confined by a top wall with a deflection angle of 2.29 degrees, under freestream Mach numbers 2 and 3. Large eddy simulations (LES) are performed using OpenFOAM, and unsteady pressure signals are analyzed through spectral methods. Results show that the aft-wall sub-cavity most effectively suppresses the dominant oscillation at Mach number 2, while the front-wall sub-cavity achieves greater suppression at Mach number 3. Density gradient (numerical Schlieren) and vorticity fields, normalized acoustic impedance, and global wavelet power reveal the mechanisms responsible for this attenuation. At Mach number 2, the aft-wall sub-cavity entrains mass and disrupts the convective feedback loop. At Mach number 3, the front-wall sub-cavity weakens the hydrodynamic-acoustic coupling near the leading edge, disrupting the compressibility-driven feedback. These configurations suppress dominant frequencies by 5.45 and 23.4 percent for Mach numbers 2 and 3, respectively. Cross-correlation between pressure probes and Dynamic Mode Decomposition (DMD) further confirm the mechanisms behind the observed frequency suppression
Open AccessSub-cavity Induced Passive Control of Confined Supersonic Cavity Flows Across Varying Freestream Mach Numbers
The self-sustaining oscillations in cavity flows enhance fluid mixing and promote energy and momentum transport. However, the associated oscillation frequencies can amplify acoustic loading, potentially damaging surrounding structures. Hence, understanding cavity dynamics across geometries and freestream conditions and developing strategies to regulate these oscillations without compromising performance are essential. This study examines the influence of sub-cavities placed at the front and aft walls of a cavity confined by a top wall with a deflection angle of 2.29 degrees, under freestream Mach numbers 2 and 3. Large eddy simulations (LES) are performed using OpenFOAM, and unsteady pressure signals are analyzed through spectral methods. Results show that the aft-wall sub-cavity most effectively suppresses the dominant oscillation at Mach number 2, while the front-wall sub-cavity achieves greater suppression at Mach number 3. Density gradient (numerical Schlieren) and vorticity fields, normalized acoustic impedance, and global wavelet power reveal the mechanisms responsible for this attenuation. At Mach number 2, the aft-wall sub-cavity entrains mass and disrupts the convective feedback loop. At Mach number 3, the front-wall sub-cavity weakens the hydrodynamic-acoustic coupling near the leading edge, disrupting the compressibility-driven feedback. These configurations suppress dominant frequencies by 5.45 and 23.4 percent for Mach numbers 2 and 3, respectively. Cross-correlation between pressure probes and Dynamic Mode Decomposition (DMD) further confirm the mechanisms behind the observed frequency suppression
- 1 October 2025
- Published by Springer Nature
- p. 17-73
Supercritical Combustion Modeling and Dynamics in LOx-Methane Rocket Engine
- 1 October 2025
- Published by Springer Nature
- p. 17-73
Supercritical Combustion Modeling and Dynamics in LOx-Methane Rocket Engine
- 1 October 2025
- Published by Springer Nature
- p. 727-743
Performance of a Darrieus-Type Vertical-Axis Wind Turbine in Urban Wind Flow Conditions
- 1 October 2025
- Published by Springer Nature
- p. 727-743
Performance of a Darrieus-Type Vertical-Axis Wind Turbine in Urban Wind Flow Conditions
- 1 October 2025
- Published by Springer Nature
- p. 75-98
Numerical Investigation of Mach 5 Flow in an Inlet-Isolator Model
- 1 October 2025
- Published by Springer Nature
- p. 75-98
Numerical Investigation of Mach 5 Flow in an Inlet-Isolator Model
- 2 September 2025
- Published by Springer Nature in The European Physical Journal Special Topics
- Vol. 234 (23) , 7175-7193
Large eddy simulation to investigate open/close-end swirl coaxial injector dynamics for a LOx-methane rocket engine
- 2 September 2025
- Published by Springer Nature in The European Physical Journal Special Topics
- Vol. 234 (23) , 7175-7193
Large eddy simulation to investigate open/close-end swirl coaxial injector dynamics for a LOx-methane rocket engine