BPF-Based Thermal Sensor Circuit for On-Chip Testing of RF Circuits
Open Access
Abstract
A new sensor topology meant to extract figures of merit of radio-frequency analog integrated circuits (RF-ICs) was experimentally validated. Implemented in a standard 0.35 μm complementary metal-oxide-semiconductor (CMOS) technology, it comprised two blocks: a single metal-oxide-semiconductor (MOS) transistor acting as temperature transducer, which was placed near the circuit to monitor, and an active band-pass filter amplifier. For validation purposes, the temperature sensor was integrated with a tuned radio-frequency power amplifier (420 MHz) and MOS transistors acting as controllable dissipating devices. First, using the MOS dissipating devices, the performance and limitations of the different blocks that constitute the temperature sensor were characterized. Second, by using the heterodyne technique (applying two nearby tones) to the power amplifier (PA) and connecting the sensor output voltage to a low-cost AC voltmeter, the PA’s output power and its central frequency were monitored. As a result, this topology resulted in a low-cost approach, with high linearity and sensitivity, for RF-IC testing and variability monitoring.Keywords
Funding Information
- Agencia Estatal de Investigación (PID2019-103869RB-C33)
This publication has 50 references indexed in Scilit:
- A Low Power Temperature to Frequency Converter for the On-Chip Temperature MeasurementIEEE Sensors Journal, 2015
- Study of heat sources interacting in integrated circuits by laser mirage effectApplied Physics Letters, 2014
- Advanced backside failure analysis in 65nm CMOS technologyMicroelectronics Reliability, 2007
- Diagnosis of Bridging Defects Based on Current Signatures at Low Power Supply Voltages2007
- Hotspot-Limited Microprocessors: Direct Temperature and Power Distribution MeasurementsIEEE Journal of Solid-State Circuits, 2006
- Cooling a Microprocessor ChipProceedings of the IEEE, 2006
- Dynamic Surface Temperature Measurements in ICsProceedings of the IEEE, 2006
- A detailed analysis of CMOS SRAM's with gate oxide short defectsIEEE Journal of Solid-State Circuits, 1997
- Thermal detection of device failure by atomic force microscopyIEEE Electron Device Letters, 1995
- IC failure analysis: techniques and tools for quality reliability improvementProceedings of the IEEE, 1993