Cyclic Behavior of Masonry Shear Walls Retrofitted with Engineered Cementitious Composite and Pseudoelastic Shape Memory Alloy
Open Access
Abstract
The behavior of masonry shear walls reinforced with pseudoelastic Ni–Ti shape memory alloy (SMA) strips and engineered cementitious composite (ECC) sheets is the main focus of this paper. The walls were subjected to quasi-static cyclic in-plane loads and evaluated by using Abaqus. Eight cases of strengthening of masonry walls were investigated. Three masonry walls were strengthened with different thicknesses of ECC sheets using epoxy as adhesion, three walls were reinforced with different thicknesses of Ni–Ti strips in a cross form bonded to both the surfaces of the wall, and one was utilized as a reference wall without any reinforcing element. The final concept was a hybrid of strengthening methods in which the Ni–Ti strips were embedded in ECC sheets. The effect of mesh density on analytical outcomes is also discussed. A parameterized analysis was conducted to examine the influence of various variables such as the thickness of the Ni–Ti strips and that of ECC sheets. The results show that using the ECC sheet in combination with pseudoelastic Ni–Ti SMA strips enhances the energy absorption capacity and stiffness of masonry walls, demonstrating its efficacy as a reinforcing method.Keywords
Funding Information
- Politechnika Poznańska (0412/SBAD/0050)
This publication has 47 references indexed in Scilit:
- In-plane cyclic behaviour of a new reinforced masonry system: Experimental resultsEngineering Structures, 2011
- Application of shape memory alloy dampers in the seismic control of cable-stayed bridgesEngineering Structures, 2009
- The behavior of concrete cylinders confined by shape memory alloy wiresSmart Materials and Structures, 2008
- A damage model for the simulation of delamination in advanced composites under variable-mode loadingMechanics of Materials, 2006
- Unseating prevention for multiple frame bridges using superelastic devicesSmart Materials and Structures, 2005
- Plastic-Damage Model for Cyclic Loading of Concrete StructuresJournal of Engineering Mechanics, 1998
- Shape-memory alloys: macromodelling and numerical simulations of the superelastic behaviorComputer Methods in Applied Mechanics and Engineering, 1997
- A Superelastic Shape-Memory-Alloy Beam ModelJournal of Intelligent Material Systems and Structures, 1997
- Shape-memory alloys: modelling and numerical simulations of the finite-strain superelastic behaviorComputer Methods in Applied Mechanics and Engineering, 1997
- A plastic-damage model for concreteInternational Journal of Solids and Structures, 1989