Experimental Study on the Mechanical Property of Visual Bolt-Ball Joint System
Authors:
- 1 October 2013
- journal article
- Published by SAGE Publications in Advances in Structural Engineering
- Vol. 16 (10) , 1749-1761
Abstract
Grid structures with bolted spherical joints suffer impairment because of the “fake tightened-up” phenomenon. To prevent the “fake tightened-up” phenomenon, this study presents a new type of visual bolt-ball joint system that visually and effectively estimates the length of threads inserted into the bolt hole after adjusting the position of the fixed trip bolt and the location of the chute. The ultimate bearing capacity of the high-strength bolt and sleeve are studied via experiments. Results show that the failure section of high-strength bolts is the inclined section, which has a 60° angle to the direction of the screw, and a formula for calculating the ultimate bearing capacity is derived. Sleeves are compressed as their bearing failure is strength failure, which is due to yielding of the net section. A design method of the visual bolt-ball joint system is put forward according to the experimental results, and the safety of the visual bolt-ball joint is verified. Finally, the ductility and the fatigue performance of the visual bolt-ball joint are discussed in the paper.Keywords
This publication has 13 references indexed in Scilit:
- Experimental and numerical model for space steel and composite semi-rigid jointsJournal of Constructional Steel Research, 2009
- Experimental and finite element investigations on the collapse of a Mero space truss roof structure – A case studyEngineering Failure Analysis, 2008
- Influence of the transformation of a non-proportional multiaxial loading to a proportional one on the high cycle fatigue lifeInternational Journal of Fatigue, 2008
- Stress Characteristics and Fatigue Crack Behaviour of the Longitudinal Rib-To-Cross Beam Joints in an Orthotropic Steel DeckAdvances in Structural Engineering, 2008
- Numerical model and experimental tests on single-layer latticed domes with semi-rigid jointsComputers & Structures, 2007
- Characterization of Unistrut Connection Method with Pultruded Fiber-Reinforced Polymer ChannelsJournal of Materials in Civil Engineering, 2006
- Assessment of low cycle fatigue strength of notched componentsMaterials & Design (1980-2015), 2006
- Fatigue life prediction of 3-D problems by damage mechanics with two-block loadingInternational Journal of Fatigue, 2002
- New Structural Forms and New Technologies in the Development of Steel Space Structures in ChinaAdvances in Structural Engineering, 2000
- Cumulative Damage in FatigueJournal of Applied Mechanics, 1945