Detection of pump cavitation by vibration signature
Authors:
- 18 November 2015
- journal article
- research article
- Published by Taylor & Francis in Australian Journal of Mechanical Engineering
- Vol. 15 (2) , 103-110
Abstract
Cavitation in pumps causes destructive consequences and occurs at certain operating circumstances. Therefore, it must be detected and prevented. The main thrust of the present work is detection and investigation of cavitation in a centrifugal pump experimentally, by monitoring the flow characteristics as well as the vibration spectrum. It is an attempt to declare the discrete signature of cavitation at various strengths on the vibration spectrum. The experimental results on a centrifugal pump at a rotational speed of 2850 rpm and absolute values of suction pressures from 10 to 78 kPa, showed that the inception of cavitation is declared by sudden deterioration in the hydraulic characteristics, decrease in the efficiency and increase in the overall vibration level. As the cavitation strength increases, the vibration level decreases and then increases sharply. Cavitation can be detected by online monitoring of the vibration amplitude of the discrete frequencies corresponding to the pump rotational speed and the first blade passing. As the pump operation moves from no-cavitation to cavitation case, the vibration amplitude of the rotational speed frequency increases while it decreases for the first passing frequency. Also, the cavitation in pumps signs the vibration spectrum by appearance of high energy at high frequencies.Keywords
This publication has 5 references indexed in Scilit:
- Strategies to Increase Energy Efficiency of Centrifugal Pumps2012
- Statistical analysis of vibration signals for cavitation detection ISIEA 20092009
- The use of noise and vibration signals for detecting cavitation in kinetic pumpsProceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2009
- Development of a predictive maintenance system for a centrifugal pumpJournal of Quality in Maintenance Engineering, 1998
- Fiber-optic pressure sensors detect cavitation and flow instabilities in centrifugal pumpsWorld Pumps, 1996