Decrease in the Starting Temperature of the Reaction for Fabricating Carbides of Refractory Metals When Using Carbon Nanoparticles as Precursors
Authors:
- Vladimir PopovVPVladimir Popov
- Anna BorunovaABAnna Borunova
- Evgeny ShelekhovESEvgeny Shelekhov
- Oksana KoplakOksana Koplak
- Elizaveta DvoretskayaEDElizaveta Dvoretskaya
- Danila MatveevDMDanila Matveev
- Alexey ProsviryakovAlexey Prosviryakov
- Ekaterina VershininaEVEkaterina Vershinina
- Vladimir CheverikinVCVladimir Cheverikin
Open Access
- 12 December 2022
- journal article
- research article
- Published by MDPI AG in Inventions
- Vol. 7 (4) , 120
Abstract
Metal matrix composites with a matrix of refractory metals (niobium, tungsten) and reinforcing nanodiamond particles were prepared for studying the possibility of decreasing the starting temperature of carbide synthesis. The size of primary nanodiamond particles was 4–6 nm, but they were combined in large-sized agglomerates. Mechanical alloying was used for producing the composites by crushing agglomerates and distributing nanodiamonds evenly in the metal matrix. The initial and fabricated materials were investigated by X-ray diffraction, differential scanning calorimetry, and transmission and scanning electron microscopy. Thermal processing leads to the reaction for carbide synthesis. Studies have found that the usage of carbon nanoparticles (nanodiamonds) as precursors for fabricating carbides of refractory metals leads to a dramatic decrease in the synthesis temperature in comparison with macro-precursors: lower than 200 °C for tungsten and lower than 350 °C for niobium.Keywords
This publication has 45 references indexed in Scilit:
- X‐ray micro‐absorption enhancement for non‐agglomerated nanodiamonds in mechanically alloyed aluminium matrix compositesPhysica Status Solidi (a), 2015
- Formation of nanocrystalline niobium carbide (NbC) with a convenient route at low temperatureJournal of Alloys and Compounds, 2009
- Aging effects on microstructural and mechanical properties of select refractory metal alloys for space-reactor applicationsJournal of Nuclear Materials, 2007
- Ball temperatures during mechanical alloying in planetary millsJournal of Alloys and Compounds, 2002
- Fabrication of Nanocomposite Materials2001
- Programs for X-ray analysis of polycrystalsMetal Science and Heat Treatment, 2000
- Simulation of the sublimation process in the preparation of photochromic WO3 film by laser microprobe mass spectrometryJournal of Non-Crystalline Solids, 2000
- Study of ultradispersed diamond powders obtained using explosion energyCarbon, 1991
- Sublimation of MoO3 from WO3$z.sbnd;MoO3 catalysts during the oxidation of toluene*1Journal of Catalysis, 1975
- The mechanism of mechanical alloyingMetallurgical Transactions, 1974