Preparation of Continuous Alumina Fiber with Nano Grains by the Addition of Iron Sol
Open Access
- 29 November 2020
- Vol. 13 (23) , 5442
Abstract
Continuous alumina fiber exhibits excellent mechanical properties owing to its dense microstructure with fine grains. In this study, alumina fiber was prepared by the sol–gel method using iron sol as a nucleating agent. It was proposed that the α-Al2O3 grain size be adjusted based on the modification of colloidal particle size. The effect of holding temperature and reaction material ratio on the iron colloidal particle size was studied. The microstructure of alumina fiber was characterized by scanning electron microscopy (SEM). The experiment results indicated that iron colloidal particle size increases with the holding temperature and the NH4HCO3/Fe(NO3)3·9H2O ratio. The alumina fiber with uniform nano α-Al2O3 grains was obtained by calcination at 1400 °C for 5 min. The mean grain size tends to rise with the mean colloidal particle size. Using the iron sol as a nucleating agent, the fiber with a mean grain size of 22.5 nm could be formed. The tensile strength of fibers increased with the decrease of grain size.Keywords
Funding Information
- National Nature Science Foundation of China (52001333)
This publication has 23 references indexed in Scilit:
- Continuous α-Al2O3 fibers grown by seeding with in-situ suspensionCeramics International, 2020
- Fabrication of α-alumina fibers by sol-gel and electrospinning of aluminum nitrate precursor solutionsResults in Physics, 2019
- Homogeneous and flexible mullite nanofibers fabricated by electrospinning through diphasic mullite sol–gel routeJournal of Materials Science, 2018
- Fiber Strength After Grain Growth in Nextel ™ 610 Alumina FiberJournal of the American Ceramic Society, 2015
- Electrospun mullite fibers from the sol–gel precursorJournal of Sol-Gel Science and Technology, 2014
- Microstructural Coarsening of Nextel ™ 610 Fibers Embedded in Alumina‐Based MatricesJournal of the American Ceramic Society, 2008
- Current and Future Possibilities of Sol-Gel ProcessTransactions of the Indian Ceramic Society, 2005
- Strength of thermally exposed alumina fibers Part I Single filament behaviorJournal of Materials Science, 2003
- Statistical tensile strength of NextelTM 610 and NextelTM 720 fibresJournal of Materials Science, 1997
- Alumina fibre FPPhilosophical Transactions of the Royal Society of London. Series A, Mathematical and Physical Sciences, 1980