Behavior of FRP‐Reinforced Concrete Columns Subjected to Combined Axial Compression and Lateral Loading
Open Access
- 1 January 2026
- journal article
- Published by Wiley in Advances in Civil Engineering
- Vol. 2026 (1) , 4568260
Abstract
This study assessed the structural properties of carbon fiber‐reinforced polymer (CFRP)‐reinforced concrete columns through large‐scale experimental testing. Ten columns, representing a segment of a first‐story building column from the footing to the point of inflection, were tested under constant axial load to simulate seismic loading conditions. Test parameters included the arrangement of longitudinal bars, spacing of transverse reinforcement, specimen length, and level of constant axial load. Columns with higher CFRP bar content, reduced CFRP grid spacing, and higher axial compression levels exhibited ductile behavior, developing inelastic displacement with minimal strength loss before failure. The predominant failure mode was governed by concrete crushing, which preceded rupture of the CFRP reinforcement in tension. In compression, CFRP bars failed through an instability (buckling) mechanism distinct from that of steel reinforcing bars: unlike steel, which undergoes plastic deformation, CFRP bars exhibited significant bending prior to reaching instability, without any capacity for plastic yielding. All columns sustained applied drift ratios with no or only limited loss of lateral strength, exceeding the 2% and 2.5% drift limits specified for earthquake‐resistant columns in the National Building Code of Canada. Hysteretic behavior revealed stiffness degradation resulting from cracking and inelastic concrete crushing; however, the hysteresis loops of CFRP‐reinforced members differed markedly from those of steel‐reinforced columns. Displacement ductility ratios ranged from 1.9 to 3.4 depending on the test parameters, while drift ratios ranged from a maximum of 2% at peak lateral strength to an ultimate value of 4.55% at failure. To further evaluate the behavior of CFRP‐reinforced concrete members, a confined concrete model originally developed from tests on steel‐reinforced columns under concentric loading was applied. Analytical moment‐curvature and moment‐axial force interaction relationships were computed and compared against experimental results, with the confined concrete model underestimating experimental values by 5%–28%. These results confirm that plane‐section analysis remains applicable for evaluating the behavior of concrete members reinforced with FRP bars.Keywords
Funding Information
- Natural Sciences and Engineering Research Council of Canada
- Semnan University (191)
This publication has 31 references indexed in Scilit:
- Model Parameter Estimation for Hysteretic Behavior Simulation of FRP‐Jacketed Reinforced Concrete ColumnsEarthquake Engineering & Structural Dynamics, 2025
- Behavior and theoretical model of FRP-RC columns under cyclic axial compressionComposite Structures, 2024
- Hysteretic model for corroded reinforced concrete columns retrofitted with FRPConstruction and Building Materials, 2023
- Behavior of CFRP-reinforced concrete columns at elevated temperaturesConstruction and Building Materials, 2022
- Seismic performance of GFRP-RC circular columns with different aspect ratios and concrete strengthsEngineering Structures, 2022
- Experimental evaluation of flexural behavior of HPFRCC beams reinforced with hybrid steel and GFRP barsComposite Structures, 2021
- Efficiency of glass-fiber reinforced-polymer (GFRP) discrete hoops and bars in concrete columns under combined axial and flexural loadsComposites Part B: Engineering, 2017
- Ultimate behaviour of FRP wrapped sections under axial force and bending: Influence of stress–strain confinement modelComposites Part B: Engineering, 2013
- Comparative analysis and critical issues of the main constitutive laws for concrete elements confined with FRPComposites Part B: Engineering, 2012
- Seismic flexural behavior of concrete connections reinforced with CFRP bars and gridsComposite Structures, 2011