Fabrication and Properties of Sandwich Dielectric Structures With Piezoelectric Response
- 8 May 2024
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Dielectrics and Electrical Insulation
- Vol. 31 (5) , 2275-2282
Abstract
In the present study, the fabrication and properties of sandwich dielectric structures with piezoelectric response are studied. The construction of 3-layer sandwich dielectric structure, including electret and non-electret layers, exhibiting piezoelectric response is presented. The fabrication process including the 3-D printing method and the molding technique is described. The model allowing calculation of piezoelectric coefficient d33 for the designed structure is proposed. The electrical properties of particular layers were examined and the assumption made in derivation of the structure model is verified. Two different charging methods were applied to activate the piezoelectric properties of the structure. The maximal calculated value of the piezoelectric coefficient d33max is found to be approximately 613 pC/N. The calculated data are compared with the experimental results. The static coefficient measured d33 is found to be up to 544 pC/N. The influence of applied static pressure on piezoelectric properties was examined and power-function approximation was applied to received data. The time stability of the piezoelectric coefficient d33 in long-term was also noted. The influence of particular electrical and mechanical properties on piezoelectric d33 coefficient is discussed. The further research including modeling of mechanical properties of the structure is proposed.Keywords
Funding Information
- Ministry of Science and Higher Education, Warsaw, Poland
This publication has 28 references indexed in Scilit:
- Fabrication process for FEP piezoelectrets based on photolithographically structured thermoforming templatesMicrosystem Technologies, 2022
- Adding an electroactive response to 3D printed materials: Printing a piezoelectretAdditive Manufacturing, 2020
- Dielectric gels with ultra-high dielectric constant, low elastic modulus, and excellent transparencyNPG Asia Materials, 2018
- Zinc Oxide-Enhanced Piezoelectret Polypropylene Microfiber for Mechanical Energy HarvestingACS Applied Materials & Interfaces, 2018
- Analytical prediction of the piezoelectric d33 response of fluoropolymer arrays with tubular air channelsScientific Reports, 2018
- Ultrasensitive cellular fluorocarbon piezoelectret pressure sensor for self-powered human physiological monitoringNano Energy, 2017
- Piezo-electric properties of polypropylene laminates with a non-woven layerJournal of Electrostatics, 2013
- Double-layer electret transducerJournal of Electrostatics, 1997
- Piezoelectric properties of nonuniform electretsJournal of Electrostatics, 1995
- Piezoelectric transducerUltrasonics, 1971