MODELING OF THE EXTERNAL MAGNETIC FIELD OF ELECTRIC MACHINES
Open Access
- 26 February 2024
- journal article
- research article
- Published by National Technical University Kharkiv Polytechnic Institute in Advanced Information Systems
- Vol. 8 (1) , 24-30
Abstract
Powerful electric machines – such as electric generators, electric motors generate a magnetic field of great tension. These fields negatively effect on personnel and can to violate the stability of electronic equipment. To determine safe areas for workers, laying communication cables and placing sensitive electronic equipment, it is advisable to model the propagation of magnetic fields of electrical machines. This will make it possible to rationalize the placing of electrical equipment at design stages. The most common high-power electrical machines are four-pole electrical machines with a dipole-quadrupole structure of the external magnetic field. The purpose of the research is a development of models of the propagation of the external magnetic field generated by alternating current electric machines. Results of the research: it is substantiated that to simulate the propagation of the magnetic field of electric machines, it is advisable to use the Gauss equation for the magnetic scalar potential. This will make it possible to take into account the required number of spatial harmonics of the magnetic field to ensure an acceptable calculation error. An electric machine is considered in a spherical approximation. Calculations were carried out in spherical coordinates. The distances were determined in relative radii of the electric machine - the ratio of the radius of the machine to the definition of field strength. The calculations were made for two planes of spherical coordinates and a three-dimensional image was obtained. As a result of the simulation, it is possible to determine the magnetic field strength of a four-pole electric machine at selected distances and directions around the electric machine with the required accuracy. It has been established that there are points of zero external magnetic field strength around electrical machines. Verification of the simulation results was carried out using the method of full-scale measurements of the magnetic field strength around a real four-pole machine. The measurement results showed acceptable agreement with the calculated data. Conclusions: the chosen approach and the results of modeling the propagation of the external magnetic field of electrical machines can be used to design the placement of electrical equipment, taking into account the requirements for electromagnetic safety and electromagnetic compatibility of technical equipment.Keywords
This publication has 15 references indexed in Scilit:
- Traffic Modeling for the Industrial Internet of NanoThings2023
- Devising a method for balancing the load on a territorially distributed foggy environmentEastern-European Journal of Enterprise Technologies, 2023
- Development of models of the electromagnetic environment in buildings and urbanized areasEastern-European Journal of Enterprise Technologies, 2022
- Methods to Manage Data in Self-healing Systems2022
- THE STUDY OF MAGNETIC FIELD OF POWER CABLES IN POLYETHYLENE PIPES WITH MAGNETIC PROPERTIESTekhnichna Elektrodynamika, 2020
- Development and study of protective properties of the composite materials for shielding the electromagnetic fields of a wide frequency rangeEastern-European Journal of Enterprise Technologies, 2020
- MODELING OF COUPLED ELECTROMECHANICAL AND THERMAL PROCESSES IN A LINEAR PERMANENT MAGNET MOTOR BASED ON THE MULTIPHYSICS CIRCUIT THEORYTekhnichna Elektrodynamika, 2020
- Development of the technique for improving the structure of a magnetic field in the aperture of a quadrupole electromagnet with a superconducting windingEastern-European Journal of Enterprise Technologies, 2018
- A THIN ELECTROMAGNETIC SHIELD OF A COMPOSITE STRUCTURE MADE ON THE BASIS OF A MAGNETIC FLUIDTekhnichna Elektrodynamika, 2018
- Cylindrical harmonic analysis of the magnetic field in the aperture of the superconducting winding of an electromagnetEastern-European Journal of Enterprise Technologies, 2018