Ultra-Low Phase Noise Frequency Division With Array of Direct Digital Synthesizers
- 25 December 2023
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 73 (00189456) , 1-10
Abstract
In this article, we present a four-channel direct digital synthesis (DDS) design that operates with a common clock ranging from 500 MHz to 24 GHz and generates output frequencies up to 1.75 GHz. A key feature of this board is its custom field-programmable gate array (FPGA)-based synchronization method, which ensures alignment accuracy of 170 ps between the channels, enabling precise frequency and phase relationship settings. In addition, the DDS board incorporates a user-friendly web interface that allows for continuous control and monitoring capabilities over TCP/IP. Multiple synchronized channels can be power-combined to produce a low-phase noise output due to coherent addition of the common carriers and the noncoherent addition of the residual DDS noise. By exploiting these principles and combining eight parallel channels of two DDS boards, we achieve exceptional residual phase noise performance, with $\mathscr {L}(1 \text {Hz}) = -147 \text {dBc/Hz}$ and $\mathscr {L}(100 \text {kHz}) = -180 \text {dBc/Hz}$ for a 9.765625 MHz output signal. These noise levels surpass the previously reported results achieved with regenerative frequency dividers. We also present a method for obtaining accurate residual noise measurements using an absolute phase modulation (PM) noise and amplitude modulation (AM) noise analyzer. Furthermore, we analyze the phase alignment tolerances required to minimize the AM-to-PM and PM-to-AM conversion that commonly occurs in power-combined signals. Finally, we demonstrate the synthesis of a highly stable 9.765625 MHz signal obtained from a cavity-stabilized optical frequency comb (OFC), with an absolute white phase noise of ${-180} \text {dBc/Hz}$ .Keywords
This publication has 20 references indexed in Scilit:
- 10 GHz generation with ultra-low phase noise via the transfer oscillator techniqueAPL Photonics, 2022
- Phase-Noise and Amplitude-Noise Measurement of DACs and DDSsIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 2019
- DDS-Based Signal-Generation Architecture Comparison for an Imaging Radar at 300 GHzIEEE Transactions on Instrumentation and Measurement, 2015
- State-of-the-art RF signal generation from optical frequency divisionIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 2013
- Tracking DDS for coherent optical links2013
- FPGA implementation of QAM modems using PR for reconfigurable wireless radios2013
- Phase noise in RF and microwave amplifiersIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 2012
- A 77-GHz Radar Transmitter with Parallelised Noise Shaping DDS2006
- Spurious signals in direct digital frequency synthesizers due to the phase truncationIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 2000
- Phase noise in the regenerative frequency dividersIEEE Transactions on Instrumentation and Measurement, 1992