Lubrication–Contact Interface Conditions and Novel Mixed/Boundary Lubrication Modeling Methodology
Authors:
Open Access
- 11 November 2021
- journal article
- research article
- Published by Springer Nature in Tribology Letters
- Vol. 69 (4) , 1-23
Abstract
Under severe conditions, solid contacts take place even when parts are lubricated. Precise mathematical conditions are needed to describe the interior interface between fluid lubrication and solid-contact zones. In order to distinguish the conditions for this interface from conventional lubrication boundary conditions, they are named lubrication–contact interface conditions (LCICs). In this work, mathematical LCICs are derived with local flow continuity from the continuum mechanics point of view and pressure inequality across the interface. Numerical implementations are developed and tested with problems having simple geometries and configurations, and they are integrated into a new mixed/boundary elastohydrodynamic lubrication solver that uses a new method to determine solid-contact pressures. This solver is capable of capturing film thickness and pressure behaviors involving solid contacts.Keywords
Funding Information
- Army Research Laboratory (W911NF-20-2-0292)
This publication has 37 references indexed in Scilit:
- Elastohydrodynamic Lubrication: A Gateway to Interfacial Mechanics—Review and ProspectJournal of Tribology, 2011
- A mixed lubrication model incorporating measured surface topography. Part 2: Roughness treatment, model validation, and simulationProceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2009
- A mixed lubrication model incorporating measured surface topography. Part 1: Theory of flow factorsProceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2009
- On some aspects of numerical solutions of thin-film and mixed elastohydrodynamic lubricationProceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2007
- EHL Film Thickness Computations at Low Speeds: Risk of Artificial Trends as a Result of Poor Accuracy and Implications for Mixed Lubrication ModellingProceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2005
- Mixed Lubrication Analyses by a Macro-Micro Approach and a Full-Scale Mixed EHL ModelJournal of Tribology, 2004
- A versatile method of discrete convolution and FFT (DC-FFT) for contact analysesWear, 2000
- A Mixed Elastohydrodynamic Lubrication Model With Asperity ContactJournal of Tribology, 1999
- A Full Numerical Solution to the Mixed Lubrication in Point ContactsJournal of Tribology, 1999
- A deterministic model for line-contact partial elastohydrodynamic lubricationTribology International, 1995