Toward 100 Micrometer per Refractive Index Unit Sensitive Sensor Using a Compact Long-Period Grating Inscribed Metal Clad Ridge Waveguide
- 5 February 2018
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 36 (10) , 2024-2030
Abstract
A novel structure with long-period grating in a metal clad ridge waveguide (MCRW) as a highly sensitive ambient refractive index (ARI) sensor is proposed suitable for biosensing applications. We have exploited the coupling between the fundamental mode and a higher order mode via the long period grating written in the photosensitive core of the MCRW. Utilizing quasitransverse electric (TE) modes of the MCRW structure, it is shown that ARI sensitivity of ~100 μm/refractive index unit (RIU) can be achieved by using dual resonance near dispersion turn around point. This ultrahigh sensitivity can be attributed to the metal under-cladding which enhances the evanescent field in the ambient medium more prominently for the higher order modes as compared to the fundamental mode. It is shown that device compactness is also increased significantly due to the metal undercladding. Further, the propagation lengths of quasi-TE modes in the proposed structure are about 35 to 185 times higher than that of quasi-transverse magnetic modes due to which, no in-line polarizer is required in the proposed device.Keywords
Funding Information
- Council of Scientific and Industrial Research, India
- Senior Research Fellowship
This publication has 34 references indexed in Scilit:
- Integrated refractive index sensor based on hybrid coupler with short range surface plasmon polariton and dielectric waveguideSensors and Actuators B: Chemical, 2013
- Long period fiber grating based temperature-compensated high performance sensor for bio-chemical sensing applicationsSensors and Actuators B: Chemical, 2013
- Optimization of sensitivity in Long Period Fiber Gratings with overlay depositionOptics Express, 2005
- Deep dry-etch of silica in a helicon plasma etcher for optical waveguide fabricationJournal of Vacuum Science & Technology A, 2004
- Sensitivity characteristics of long-period fiber gratingsJournal of Lightwave Technology, 2002
- Highly sensitive chemical sensor based on the measurement of the separation of dual resonant peaks in a 100-μm-period fiber gratingOptics Communications, 1999
- Dual resonant peaks of LP 015 claddingmode in long-period gratingsElectronics Letters, 1999
- Preparation of Bragg gratings in sputter-deposited GeO_2–SiO_2 glasses by excimer-laser irradiationOptics Letters, 1996
- Optical fiber long-period grating sensorsOptics Letters, 1996
- Comments on the Optical Constants of Metals and an Introduction to the Data for Several Metals1985