Characterization of Additive Layer Manufacturing Swirl Burner Surface Roughness and Its Effects on Flame Stability Using High-Speed Diagnostics
Open Access
- 4 February 2020
- journal article
- research article
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 142 (4)
Abstract
In this study, two Inconel 625 swirl nozzle inserts with identical bulk geometry were constructed via additive layer manufacturing (ALM) for use in a generic gas turbine swirl burner. Further postprocessing by grit blasting of one swirl nozzle insert results in a quantifiable change to the surface roughness characteristics when compared with the unprocessed ALM swirl nozzle insert or a third nozzle insert which has been manufactured using traditional machining methods. An evaluation of the influence of variable surface roughness effects from these swirl nozzle inserts is therefore performed under preheated isothermal and combustion conditions for premixed methane-air flames at thermal power of 25 kW. High-speed velocimetry at the swirler exit under isothermal conditions gives evidence of the change in near-wall boundary layer thickness and turbulent fluctuations resulting from the change in nozzle surface roughness. Under atmospheric combustion conditions, this influence is further quantified using a combination of dynamic pressure, high-speed OH* chemiluminescence, and exhaust gas emissions measurements to evaluate the flame stabilization mechanisms at the lean blowoff and rich stability limits. Notable differences in flame stabilization are evident as the surface roughness is varied, and changes in rich stability limit were investigated in relation to changes in the near-wall turbulence intensity. Results show that precise control of in-process or postprocess surface roughness of wetted surfaces can positively influence burner stability limits and NOx emissions and must, therefore, be carefully considered in the ALM burner design process as well as computational fluid dynamics (CFD) models.Keywords
This publication has 19 references indexed in Scilit:
- The response of stratified swirling flames to acoustic forcing: Experiments and comparison to modelProceedings of the Combustion Institute, 2015
- Metal Additive Manufacturing: A ReviewJournal of Materials Engineering and Performance, 2014
- Surface roughness analysis, modelling and prediction in selective laser meltingJournal of Materials Processing Technology, 2013
- Gas turbine operation and combustion performance issues2013
- Investigation of Fluid Flow and Heat Transfer Characteristics of Gases in Microchannels with Consideration of Different Roughness Shapes at Slip Flow RegimeNanoscale and Microscale Thermophysical Engineering, 2010
- A Review of Surface Roughness Effects in Gas TurbinesJournal of Turbomachinery, 2010
- Selective Laser Melting of thin wall parts using pulse shapingJournal of Materials Processing Technology, 2010
- The burning rate of premixed flames in moderate and intense turbulenceCombustion and Flame, 2001
- Turbulence structure in boundary layers over different types of surface roughnessFluid Dynamics Research, 2001
- On vortex shedding from smooth and rough cylinders in the range of Reynolds numbers 6×103 to 5×106Journal of Fluid Mechanics, 1981