The effects of aluminum concentration on the microstructural and electrochemical properties of lithium lanthanum zirconium oxide
- 28 September 2022
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 10 (41) , 21955-21972
Abstract
Cubic lithium lanthanum zirconium oxide (Li7−xAlxLa3Zr2O12, LLZO) garnet has gained attention as a promising next-generation electrolyte for lithium batteries due to its high ionic conductivity and chemical stability with lithium metal. The high conductivity can be achieved through doping over a range of aluminum concentrations. In this study, we hot-pressed samples to achieve x = 0.25–0.55 mol to understand the effect of aluminum on microstructure and electrochemistry. It was observed that beyond the aluminum solubility limit (x = ∼0.40), resistive secondary phases formed at the grain boundaries. As a result, the percent grain boundary resistance increased from 17.6 to 41.2% for x = 0.25 and x = 0.55, respectively. Both the grain boundary and bulk activation energies remained relatively constant as the aluminum concentrations increased (∼0.44 eV and ∼0.39 eV, respectively). It was, therefore, surmised that the mobility term of the Nernst–Einstein equation was roughly independent of aluminum concentration and the major variable controlling bulk conductivity was the number of lithium charge carriers. As a result, as the aluminum concentration increased from x = 0.25 to x = 0.55 the bulk conductivity decreased from 0.56 to 0.15 mS cm−1. Following these trends of increasing grain boundary resistance and decreasing bulk conductivity with increasing aluminum concentration, x = 0.25 had the highest total conductivity (0.46 mS cm−1). We demonstrated that aluminum concentration has a significant effect on the microstructure and electrochemical properties of LLZO. We believe this work could help understand how to link processing, microstructure, and electrochemical properties to guide the manufacturing of LLZO for use in solid-state batteries.Keywords
Funding Information
- Bundesministerium für Forschung, Technologie und Raumfahrt (03XP0223E)
- Bundesministerium für Forschung, Technologie und Raumfahrt (A13XP0173A)
- Bundesministerium für Forschung, Technologie und Raumfahrt (E13XP0258B)
- Bundesministerium für Forschung, Technologie und Raumfahrt (A13XP0434A)
- Bundesministerium für Forschung, Technologie und Raumfahrt (B13XP0510A)
- Vehicle Technologies Program (DE-ACO5-000R22275)
- University of Michigan
This publication has 64 references indexed in Scilit:
- Li+ transport properties of W substituted Li7La3Zr2O12 cubic lithium garnetsAIP Advances, 2013
- Cubic phases of garnet-type Li7La3Zr2O12: the role of hydrationJournal of Materials Chemistry A, 2013
- Effect of substitution (Ta, Al, Ga) on the conductivity of Li7La3Zr2O12Journal of Power Sources, 2012
- Lithium metal electrode kinetics and ionic conductivity of the solid lithium ion conductors “Li7La3Zr2O12” and Li7−La3Zr2−Ta O12 with garnet-type structureJournal of Power Sources, 2012
- Al-doped Li7La3Zr2O12 synthesized by a polymerized complex methodJournal of Power Sources, 2011
- High lithium ion conductive Li7La3Zr2O12 by inclusion of both Al and SiElectrochemistry Communications, 2011
- High lithium ionic conductivity in the garnet-type oxide Li7−X La3(Zr2−X, NbX)O12 (X=0–2)Journal of Power Sources, 2011
- Sol–gel synthesis and lithium ion conductivity of Li7La3Zr2O12 with garnet-related type structureSolid State Ionics, 2011
- Optimized time-of-flight secondary ion mass spectroscopy depth profiling with a dual beam techniqueJournal of Vacuum Science & Technology A, 1997
- Li ion conduction in Li2ZrO3, Li4ZrO4, and LiScO2Solid State Ionics, 1981