Simulation study on noise reduction of electric vehicle tire with built-in sound-absorbing material
Open Access
- 11 February 2025
- journal article
- product review
- Published by EDP Sciences in Acta Acustica
- Vol. 9, 11
Abstract
Tire cavity noise is becoming more prominent as the speed of electric vehicles is getting higher. This study aims to use a built-in sound-absorbing material to reduce tire cavity noise. First, the radial force was extracted by rolling analysis, and the tire cavity noise was obtained. Then, in order to investigate how the placement of sound-absorbing material affects the noise reduction, sound-absorbing material was applied to the inner side of tire’s side and tread position respectively. Finally, studies were done on the impact of sound-absorbing material’s density, flow resistance, porosity, and thickness on tire noise reduction. The best way to reduce noise with a 215/55R17 tire was to apply sound-absorbing material at side position. The density, porosity, flow resistance and thickness of the sound-absorbing material were 55 kg/m3, 0.95, 5000 Pa·s/m2 and 40 mm, respectively. The A-weighted sound pressure level decreased by 27.7 dB compared with that before the built-in sound-absorbing material. In response to the uncertainties on the reduction achieved by the sound-absorbing material, this study offers some recommendations for noise reduction of tire cavity. The studied effect is limited to the tire cavity, and the effect on the emitted sound energy has not been evaluated.Keywords
Funding Information
- National Natural Science Foundation of China (51805241; 51605215; 52372357)
- State Key Laboratory of Automotive Simulation and Control (20210205)
- Nanjing Institute of Technology Innovation Foundation (CKJB202206)
- Postgraduate Science & Technology Innovation Program of Nanjing Institute of Technology (TB202417031)
This publication has 17 references indexed in Scilit:
- Topology Optimization of Inserts Structure of Run-Flat Tire under Zero-Pressure Driving ConditionInternational Journal of Automotive Technology, 2023
- Statistical tyre/road noise modelling based on continuous 3D texture dataActa Acustica, 2021
- Sound absorption performance of natural fiber composite from chrome shave and coffee silver skinApplied Acoustics, 2021
- Numerical analysis on tractive performance of off-road tire on gravel road using a calibrated finite element method–discrete element method model and experimental validationProceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 2020
- Understanding the contribution of groove resonance to tire-road noise on different surfaces under various operating conditionsActa Acustica, 2020
- Characteristics of sound pressure in the tire cavity arising from acoustic cavity resonance excited by road roughnessApplied Acoustics, 2019
- A study of tyre cavity resonance and noise reduction using inner trimMechanical Systems and Signal Processing, 2015
- Cavity noise sensitivity analysis of tire contour design factors and application of contour optimization methodologyJournal of Central South University, 2012
- A shell model for tyre belt vibrationsJournal of Sound and Vibration, 2010
- Analysis of wavelet correlation between tyre sounds and tread patterns2005