Waste Fuel Combustion: Dynamic Modeling and Control
Open Access
Abstract
The focus of this study is to present the adherent transients that accompany the combustion of waste derived fuels. This is accomplished, in large, by developing a dynamic model of the process, which can then be used for control purposes. Traditional control measures typically applied in the heat and power industry, i.e., PI (proportional-integral) controllers, might not be robust enough to handle the the accompanied transients associated with new fuels. Therefore, model predictive control is introduced as a means to achieve better combustion stability under transient conditions. The transient behavior of refuse derived fuel is addressed by developing a dynamic modeling library. Within the library, there are two models. The first is for assessing the performance of the heat exchangers to provide operational assistance for maintenance scheduling. The second model is of a circulating fluidized bed block, which includes combustion and steam (thermal) networks. The library has been validated using data from a 160 MW industrial installation located in Västerås, Sweden. The model can predict, with satisfactory accuracy, the boiler bed and riser temperatures, live steam temperature, and boiler load. This has been achieved by using process sensors for the feed-in streams. Based on this model three different control schemes are presented: a PI control scheme, model predictive control with feedforward, and model predictive control without feedforward. The model predictive control with feedforward has proven to give the best performance as it can maintain stable temperature profiles throughout the process when a measured disturbance is initiated. Furthermore, the implemented control incorporates the introduction of a soft-sensor for measuring the minimum fluidization velocity to maintain a consistent level of fluidization in the boiler for deterring bed material agglomeration.Keywords
Funding Information
- Swedish Knowledge Foundation (20120276)
This publication has 54 references indexed in Scilit:
- Effects of bed material size distribution, operating conditions and agglomeration phenomenon on heavy metal emission in fluidized bed combustion processWaste Management, 2012
- Detection of agglomeration and gradual particle size changes in circulating fluidized bedsPowder Technology, 2010
- Case studies for selective agglomeration detection in fluidized beds: Application of a new screening methodologyPowder Technology, 2010
- Contribution of individual waste fractions to the environmental impacts from landfilling of municipal solid wasteWaste Management, 2010
- One dimensional numerical simulation of small scale CFB combustorsEnergy Conversion and Management, 2009
- Simplified model for calculation of devolatilization in fluidized bedsFuel, 2006
- Dynamic model of the riser in circulating fluidized bedPowder Technology, 2006
- Application of model predictive control to advanced combustion controlControl Engineering Practice, 2005
- Formation of bed agglomeration in a fluidized multi-waste incinerator☆Fuel, 2003
- A predictive hydrodynamic model for circulating fluidized bed risersPowder Technology, 1996