Anisotropic Shrinkage in Tape‐Cast Alumina: Role of Processing Parameters and Particle Shape
Authors:
- 1 October 1999
- journal article
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 82 (10) , 2619-2625
Abstract
Aqueous suspensions of alumina and other powders containing no visible morphological anisotropy were tape cast under different conditions to study the role of processing parameters and powder characteristics in the origin of in‐plane sintering shrinkage anisotropy. High anisotropic shrinkage, with the typical shrinkage in the transverse direction exceeding that in the casting direction by more than 10%, was observed for tape‐cast alumina cast at high solids loading and high shear rates. Tape casting without any binder also resulted in similar anisotropy. Lower solids loading with increased agglomeration resulted in a drastic reduction of shrinkage anisotropy. Under similar casting conditions, BaTiO 3 did not show any shrinkage anisotropy unlike alumina. Cubic zinc ferrite and titania powders also showed some consistent shrinkage anisotropy. A correlation was found between in‐plane particle orientation and anisotropic shrinkage proving that powder characteristics, particularly particle shape, control anisotropic shrinkage even in apparently equiaxed powders.Keywords
This publication has 15 references indexed in Scilit:
- Theory of sintering: from discrete to continuumMaterials Science and Engineering: R: Reports, 1998
- Grain‐Oriented Microstructure of Alumina Ceramics Made through the Injection Molding ProcessJournal of the American Ceramic Society, 1997
- Characterization of Particle Packing in an Injected Molded Green BodyJournal of the American Ceramic Society, 1995
- Anisotropic shrinkage of barium-magnesium aluminosilicate glass powder compacts during sinteringMaterials Letters, 1995
- Texture Formation in Al 2O3 SubstratesMaterials Science Forum, 1994
- Anisotropic sintering shrinkage in injection-moulded composite ceramicsJournal of the European Ceramic Society, 1993
- Prediction and Explanation of Aging Shrinkage in Tape‐Cast Ceramic Green SheetsJournal of the American Ceramic Society, 1992
- Particle Orientation During Tape Casting in the Fabrication of Grain‐Oriented Bismuth TitanateJournal of the American Ceramic Society, 1989
- Anisotropic shrinkage of cordierite-type glass powder cylindrical compactsJournal of Materials Research, 1988
- Review of multilayer ceramics for microelectronic packagingJournal of Physics and Chemistry of Solids, 1984