Influence of shoulder margin and feather‐edge incisal preparations on the marginal and internal adaptation of laminate veneers fabricated with three manufacturing techniques
- 25 March 2025
- journal article
- Published by Wiley in Journal of Prosthodontics
Abstract
Purpose: To compare the marginal and internal adaptation of shoulder margin and feather‐edge 3D‐printed veneers with milled zirconia and pressed lithium disilicate laminate veneers.Materials and Methods: Veneer preparations were made on the right and left maxillary incisors using shoulder margin and feather‐edge designs. The preparations were scanned to create the reference standard tessellation language (STL) file. Ninety laminate veneers were fabricated for each preparation design using 3D‐VS (3D‐printing Varseosmile), M‐Zr (milled zirconia), and P‐LD (pressed lithium disilicate). All veneers were digitized to generate test STL files, which were then used to measure 3D deviations from the reference file with a 3D software program. Marginal and internal adaptation, as well as trueness, were assessed. Color maps were produced to quantify the mean ± standard deviation of the 3D deviations between the reference and test STL files.Results: The marginal discrepancy was significantly higher in the feather‐edge design than in the shoulder margin design across all groups (p < 0.001). M‐Zr exhibited the best marginal adaptation in all four measured areas: cervical (30.2±4.02 µm), mesial (15.8±2.97 µm), distal (16.7±3.23 µm), and incisal (20.6±2.36 µm) for shoulder margin design. For feather‐edge designs, M‐Zr excelled in all areas: cervical (29.5±2.71 µm), mesial (15.8±2.97 µm), distal (17.2±2.65 µm), and incisal (45.3±3.97 µm). Statistically significant differences in internal adaptation were found among the 3 groups (p < 0.001). M‐Zr demonstrated the best internal adaptation in the cervical third (shoulder margin: 25.3±1.49 µm, feather‐edge: 19.2±3.52 µm) and middle third (shoulder margin: 14.3±3.09 µm; feather‐edge: 14.1±2.31 µm). Trueness of M‐Zr was better than that of other groups (p < 0.001) (shoulder margin: 17.4±1.74 µm; feather‐edge 20.4±1.33 µm).Conclusions: M‐Zr veneers had the best marginal and internal adaptation of the fabrication methods and materials tested. Shoulder margin design consistently exhibited better fit across all three materials. The marginal and internal adaptations for the three materials were within the acceptable clinical range.Keywords
This publication has 37 references indexed in Scilit:
- Effect of 3D printing technology and print orientation on the trueness of additively manufactured definitive casts with different tooth preparationsJournal of Dentistry, 2024
- Accuracy of the intaglio surface of 3D-printed hybrid resin-ceramic crowns, veneers and table-tops: An in vitro studyJournal of Dentistry, 2024
- Fabrication trueness and marginal quality of additively manufactured resin-based definitive laminate veneers with different restoration thicknessesJournal of Dentistry, 2024
- Fit of anterior restorations made of 3D-printed and milled zirconia: An in-vitro studyJournal of Dentistry, 2023
- Accuracy of additively manufactured zirconia four-unit fixed dental prostheses fabricated by stereolithography, digital light processing and material jetting compared with subtractive manufacturingDental Materials, 2022
- Load-bearing capacity of CAD/CAM 3D-printed zirconia, CAD/CAM milled zirconia, and heat-pressed lithium disilicate ultra-thin occlusal veneers on molarsDental Materials, 2020
- Randomized clinical trial on indirect resin composite and ceramic laminate veneers: Up to 10-year findingsJournal of Dentistry, 2019
- Fracture load of CAD/CAM-fabricated and 3D-printed composite crowns as a function of material thicknessClinical Oral Investigations, 2018
- Chipping behaviour of all-ceramic crowns with zirconia framework and CAD/CAM manufactured veneerJournal of Dentistry, 2012
- Clinical performance of porcelain laminate veneers without incisal overlapping: 3-year resultsJournal of Dentistry, 1994