Ahmed M. Aziz
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Ahmed M. Aziz has a total of 35 co-authors. Here are the top co-authors by number of shared publications:
Adam Bin Husein
Department of Restorative Dentistry College of Dental Medicine, University of Sharjah Sharjah UAE
3 shared publications- Waad Kheder
Department of Restorative Dentistry, College of Dental Medicine University of Sharjah Sharjah UAE
3 shared publications Zaid Hamdoon
Department of Oral and Craniofacial Health Sciences, College of Dental Medicine University of Sharjah Sharjah UAE
3 shared publicationsHerenia P. Lawrence
Associate Professor, Department of Dental Public Health, Faculty of Dentistry, University of Toronto, Toronto, Ontario, Canada
2 shared publicationsHiba Alshaibah
Prosthodontic Department Sharjah Specialized Dental Center, Emirates Health Services UAE
2 shared publicationsHoward C. Tenenbaum
Professor, Department of Periodontics, Faculty of Dentistry, University of Toronto, Dentist-in-Chief, Sinai Health System, Toronto, Ontario, Canada
2 shared publications
Latest Publications
- Open Access
- 17 November 2026
- Published by Wiley in Clinical and Experimental Dental Research
- Vol. 12 (6)
Maxillary Tuberosity Fractures Encountered During Non‐Surgical Maxillary Third Molar Extraction: A Descriptive Classification and Management Framework
Objectives: Maxillary tuberosity fractures during non‐surgical maxillary third molar extraction can cause significant complications, highlighting the need for early risk identification and standardized management. Understanding fracture patterns may assist clinicians in optimizing treatment decisions and anticipating morbidity. This study aimed to develop the Tuberosity Fracture Risk and Management (TFRaM) classification system and perform an initial clinical evaluation of its association with fracture patterns, complications, and management strategies. Materials and Methods: This prospective clinical study was conducted at a single‐center outpatient oral surgery department. Patients in whom a maxillary tuberosity fracture was identified intraoperatively during non‐surgical maxillary third molar extraction were included. A total of 187 patients were enrolled between January 2021 and July 2025. Results: Among the 187 patients, 159 (85.0%) sustained Class A fractures, while 14 (7.5%) each experienced Class B and C fractures. Class B fractures showed the highest complication rates, including oroantral communication (OAC) (64.3%), severe bleeding (28.6%), and intraoral ecchymosis (78.6%). Class C fractures were also associated with notable morbidity, with OAC and trismus occurring in 50% of cases. Class A fractures were mostly uncomplicated and managed conservatively. Conclusions: The TFRaM classification demonstrated clinically meaningful stratification of maxillary tuberosity fractures by severity and correlates fracture patterns with complication profiles and management escalation, supporting its use as a practical intraoperative tool to guide clinical decision‐making and reduce morbidity.
- 17 November 2026
- Published by Wiley in Clinical and Experimental Dental Research
- Vol. 12 (6)
Open AccessMaxillary Tuberosity Fractures Encountered During Non‐Surgical Maxillary Third Molar Extraction: A Descriptive Classification and Management Framework
Objectives: Maxillary tuberosity fractures during non‐surgical maxillary third molar extraction can cause significant complications, highlighting the need for early risk identification and standardized management. Understanding fracture patterns may assist clinicians in optimizing treatment decisions and anticipating morbidity. This study aimed to develop the Tuberosity Fracture Risk and Management (TFRaM) classification system and perform an initial clinical evaluation of its association with fracture patterns, complications, and management strategies. Materials and Methods: This prospective clinical study was conducted at a single‐center outpatient oral surgery department. Patients in whom a maxillary tuberosity fracture was identified intraoperatively during non‐surgical maxillary third molar extraction were included. A total of 187 patients were enrolled between January 2021 and July 2025. Results: Among the 187 patients, 159 (85.0%) sustained Class A fractures, while 14 (7.5%) each experienced Class B and C fractures. Class B fractures showed the highest complication rates, including oroantral communication (OAC) (64.3%), severe bleeding (28.6%), and intraoral ecchymosis (78.6%). Class C fractures were also associated with notable morbidity, with OAC and trismus occurring in 50% of cases. Class A fractures were mostly uncomplicated and managed conservatively. Conclusions: The TFRaM classification demonstrated clinically meaningful stratification of maxillary tuberosity fractures by severity and correlates fracture patterns with complication profiles and management escalation, supporting its use as a practical intraoperative tool to guide clinical decision‐making and reduce morbidity.
- Open Access
- 1 January 2026
- Published by Wiley in International Journal of Dentistry
- Vol. 2026 (1) , 4758496
Collagenated Xenogeneic Versus Autogenous Bone Grafts for Ridge Reconstruction: A Prospective Study
This study aimed to compare the clinical performance of autogenous bone blocks with customized and noncustomized bovine bone blocks for horizontal alveolar ridge augmentation. Forty‐eight participants with deficient alveolar ridges were divided into threegroups ( n = 16): Group I (autogenous bone graft), Group II (noncustomized bovine bone block), and Group III (customized bovine bone block). Graft success, postsurgical complications, bone formation, and resorption rates were recorded and analyzed after 6 months. Patient satisfaction and postoperative pain were assessed using a visual analog scale. A total of 39 bone blocks were integrated successfully. Survival rates for Groups I, II, and III were 100% (95% CI: 79.4%–100%), 75.0% (95% CI: 47.6%–92.7%), and 68.8% (95% CI: 41.3%–89.0%), respectively ( p = 0.07). Dehiscence, screw exposure, and partial bone loss were the most common postoperative complications. Bone formation and resorption did not differ significantly between groups ( p = 0.61 and p = 0.12, respectively). Group I experienced significantly higher pain from day 3 to day 7 compared to other groups ( p < 0.001), with peak pain on day 6 (5.75 ± 1.12), while Groups II and III reported peak pain on day 3 (3.06 ± 0.92 and 3.44 ± 0.81, respectively). By day 10, pain scores had decreased substantially in all groups, with Group III reporting the lowest scores (0.31 ± 0.48, p = 0.003). Patient satisfaction was highest in Group III (91%). Within the limitations of this prospective comparative study, onlay grafting with bovine bone blocks demonstrated clinically acceptable outcomes for horizontal ridge augmentation, with resorption rates comparable to autogenous grafts. However, the observed survival differences did not reach statistical significance, and the wide confidence intervals reflect the limited sample size, suggesting that clinically meaningful differences cannot be excluded. Customized bovine bone blocks showed similar clinical performance to noncustomized blocks with higher patient satisfaction. Larger randomized controlled trials with longer follow‐up are warranted to confirm these findings.
- 1 January 2026
- Published by Wiley in International Journal of Dentistry
- Vol. 2026 (1) , 4758496
Open AccessCollagenated Xenogeneic Versus Autogenous Bone Grafts for Ridge Reconstruction: A Prospective Study
This study aimed to compare the clinical performance of autogenous bone blocks with customized and noncustomized bovine bone blocks for horizontal alveolar ridge augmentation. Forty‐eight participants with deficient alveolar ridges were divided into threegroups ( n = 16): Group I (autogenous bone graft), Group II (noncustomized bovine bone block), and Group III (customized bovine bone block). Graft success, postsurgical complications, bone formation, and resorption rates were recorded and analyzed after 6 months. Patient satisfaction and postoperative pain were assessed using a visual analog scale. A total of 39 bone blocks were integrated successfully. Survival rates for Groups I, II, and III were 100% (95% CI: 79.4%–100%), 75.0% (95% CI: 47.6%–92.7%), and 68.8% (95% CI: 41.3%–89.0%), respectively ( p = 0.07). Dehiscence, screw exposure, and partial bone loss were the most common postoperative complications. Bone formation and resorption did not differ significantly between groups ( p = 0.61 and p = 0.12, respectively). Group I experienced significantly higher pain from day 3 to day 7 compared to other groups ( p < 0.001), with peak pain on day 6 (5.75 ± 1.12), while Groups II and III reported peak pain on day 3 (3.06 ± 0.92 and 3.44 ± 0.81, respectively). By day 10, pain scores had decreased substantially in all groups, with Group III reporting the lowest scores (0.31 ± 0.48, p = 0.003). Patient satisfaction was highest in Group III (91%). Within the limitations of this prospective comparative study, onlay grafting with bovine bone blocks demonstrated clinically acceptable outcomes for horizontal ridge augmentation, with resorption rates comparable to autogenous grafts. However, the observed survival differences did not reach statistical significance, and the wide confidence intervals reflect the limited sample size, suggesting that clinically meaningful differences cannot be excluded. Customized bovine bone blocks showed similar clinical performance to noncustomized blocks with higher patient satisfaction. Larger randomized controlled trials with longer follow‐up are warranted to confirm these findings.
- Open Access
- 1 January 2026
- Published by Wiley in International Journal of Dentistry
- Vol. 2026 (1)
Anatomical Variations in Permanent Mandibular Molars in the Sharjah Population: A Cohort Study Using Cone‐Beam Computed Tomography
Objective: This cohort study aimed to assess the prevalence of anatomical variations, including radix entomolaris (RE), radix paramolaris (RP), middle mesial canal (MMC), and C‐shaped canal, in the permanent mandibular first and second molars across different nationalities and genders. Materials and Methods: A total of 777 cone‐beam computed tomography scans were retrospectively evaluated from patients receiving routine dental treatment at the University Dental Hospital, Sharjah, United Arab Emirates (UAE), of which 165 met the inclusion criteria. Descriptive statistics were presented as the overall number of canals and the prevalence and distribution of RE, RP, MMC, and C‐shaped canals in the permanent mandibular first and second molars. Chi‐square tests were performed for comparative analyses. Results: None of the mandibular first molars included had RE, RP, or MMC. No gender differences were detected. One participant (0.30%) had a C‐shaped canal configuration. In mandibular second molars, the overall prevalence of C‐shaped canal anatomy was 4.54%, and 0.30% for RE. A case of RE was exclusively observed in one first molar, with no instances of RP or MMC identified in our study population. Conclusion: In this study, the majority of permanent first molars exhibited two roots and four canals, while permanent second molars most frequently had two roots and three canals, with greater variations revealed in second molars and most frequently observed in Pakistani patients. A C‐shaped canal configuration was more common in the second molars than in the first ones. Overall, Asian and African ethnicities tended to have significantly more canal variations than Western populations. Clinical Significance: The clinical relevance of this study lies in its potential to enhance diagnostic accuracy, treatment planning, and patient outcomes by understanding common variations and their prevalence across various ethnic groups. Therefore, clinicians can better anticipate the challenges and implications of treatment.
- 1 January 2026
- Published by Wiley in International Journal of Dentistry
- Vol. 2026 (1)
Open AccessAnatomical Variations in Permanent Mandibular Molars in the Sharjah Population: A Cohort Study Using Cone‐Beam Computed Tomography
Objective: This cohort study aimed to assess the prevalence of anatomical variations, including radix entomolaris (RE), radix paramolaris (RP), middle mesial canal (MMC), and C‐shaped canal, in the permanent mandibular first and second molars across different nationalities and genders. Materials and Methods: A total of 777 cone‐beam computed tomography scans were retrospectively evaluated from patients receiving routine dental treatment at the University Dental Hospital, Sharjah, United Arab Emirates (UAE), of which 165 met the inclusion criteria. Descriptive statistics were presented as the overall number of canals and the prevalence and distribution of RE, RP, MMC, and C‐shaped canals in the permanent mandibular first and second molars. Chi‐square tests were performed for comparative analyses. Results: None of the mandibular first molars included had RE, RP, or MMC. No gender differences were detected. One participant (0.30%) had a C‐shaped canal configuration. In mandibular second molars, the overall prevalence of C‐shaped canal anatomy was 4.54%, and 0.30% for RE. A case of RE was exclusively observed in one first molar, with no instances of RP or MMC identified in our study population. Conclusion: In this study, the majority of permanent first molars exhibited two roots and four canals, while permanent second molars most frequently had two roots and three canals, with greater variations revealed in second molars and most frequently observed in Pakistani patients. A C‐shaped canal configuration was more common in the second molars than in the first ones. Overall, Asian and African ethnicities tended to have significantly more canal variations than Western populations. Clinical Significance: The clinical relevance of this study lies in its potential to enhance diagnostic accuracy, treatment planning, and patient outcomes by understanding common variations and their prevalence across various ethnic groups. Therefore, clinicians can better anticipate the challenges and implications of treatment.
- 22 December 2025
- Published by Wiley in Clinical Implant Dentistry and Related Research
- Vol. 27 (6) , e70116
Five‐Year Multicenter Study on One‐Piece Narrow Implants for Congenitally Missing Maxillary Lateral Incisors
Purpose: This prospective multicenter study evaluated the 5‐year clinical performance of one‐piece, long, smooth‐necked narrow‐diameter implants (NDIs) in rehabilitating patients with congenital maxillary lateral incisor agenesis and limited alveolar bone. Materials and Methods: Patients aged ≥ 18 years with unilateral or bilateral agenesis and mesiodistal spaces of 3.5–5.5 mm were recruited. Flapless implant placement of Ø2.7 mm, smooth‐necked implants was performed, followed by immediate loading with lithium disilicate crowns. Radiographic assessments of marginal bone levels, peri‐implant soft tissue parameters, and esthetic outcomes were conducted at baseline, 1 month, 1 year, and 5 years. Implant survival, success, and mechanical/biological complications were systematically recorded. Statistical analyses employed Kaplan–Meier survival curves and ANOVA with significance set at p < 0.05. Results: Forty‐six patients completed the 5‐year follow‐up. Implant survival and success rates were 97.8% and 93.5%, respectively. Mean marginal bone loss was 0.43 ± 0.06 mm at 1 year and 0.84 ± 0.11 mm at 5 years. Probing depths and bleeding indices remained within normal limits (2.96 ± 0.1 mm at 5 years). Papilla preservation was achieved in 89% of cases, and pink esthetic scores indicated stable soft tissue integration. Mechanical complications were minimal, with two cementation failures and one minor ceramic chipping; no implant or abutment fractures occurred. Conclusions: One‐piece NDIs represent a reliable, esthetic, and cost‐effective treatment option for maxillary lateral incisor agenesis in patients with limited alveolar dimensions. High survival, minimal bone loss, stable soft tissue, and low complication rates support their use as a minimally invasive, patient‐centered solution.
- 22 December 2025
- Published by Wiley in Clinical Implant Dentistry and Related Research
- Vol. 27 (6) , e70116
Five‐Year Multicenter Study on One‐Piece Narrow Implants for Congenitally Missing Maxillary Lateral Incisors
Purpose: This prospective multicenter study evaluated the 5‐year clinical performance of one‐piece, long, smooth‐necked narrow‐diameter implants (NDIs) in rehabilitating patients with congenital maxillary lateral incisor agenesis and limited alveolar bone. Materials and Methods: Patients aged ≥ 18 years with unilateral or bilateral agenesis and mesiodistal spaces of 3.5–5.5 mm were recruited. Flapless implant placement of Ø2.7 mm, smooth‐necked implants was performed, followed by immediate loading with lithium disilicate crowns. Radiographic assessments of marginal bone levels, peri‐implant soft tissue parameters, and esthetic outcomes were conducted at baseline, 1 month, 1 year, and 5 years. Implant survival, success, and mechanical/biological complications were systematically recorded. Statistical analyses employed Kaplan–Meier survival curves and ANOVA with significance set at p < 0.05. Results: Forty‐six patients completed the 5‐year follow‐up. Implant survival and success rates were 97.8% and 93.5%, respectively. Mean marginal bone loss was 0.43 ± 0.06 mm at 1 year and 0.84 ± 0.11 mm at 5 years. Probing depths and bleeding indices remained within normal limits (2.96 ± 0.1 mm at 5 years). Papilla preservation was achieved in 89% of cases, and pink esthetic scores indicated stable soft tissue integration. Mechanical complications were minimal, with two cementation failures and one minor ceramic chipping; no implant or abutment fractures occurred. Conclusions: One‐piece NDIs represent a reliable, esthetic, and cost‐effective treatment option for maxillary lateral incisor agenesis in patients with limited alveolar dimensions. High survival, minimal bone loss, stable soft tissue, and low complication rates support their use as a minimally invasive, patient‐centered solution.
- 25 March 2025
- Published by Wiley in Journal of Prosthodontics
Influence of shoulder margin and feather‐edge incisal preparations on the marginal and internal adaptation of laminate veneers fabricated with three manufacturing techniques
Purpose: To compare the marginal and internal adaptation of shoulder margin and feather‐edge 3D‐printed veneers with milled zirconia and pressed lithium disilicate laminate veneers.Materials and Methods: Veneer preparations were made on the right and left maxillary incisors using shoulder margin and feather‐edge designs. The preparations were scanned to create the reference standard tessellation language (STL) file. Ninety laminate veneers were fabricated for each preparation design using 3D‐VS (3D‐printing Varseosmile), M‐Zr (milled zirconia), and P‐LD (pressed lithium disilicate). All veneers were digitized to generate test STL files, which were then used to measure 3D deviations from the reference file with a 3D software program. Marginal and internal adaptation, as well as trueness, were assessed. Color maps were produced to quantify the mean ± standard deviation of the 3D deviations between the reference and test STL files.Results: The marginal discrepancy was significantly higher in the feather‐edge design than in the shoulder margin design across all groups (p < 0.001). M‐Zr exhibited the best marginal adaptation in all four measured areas: cervical (30.2±4.02 µm), mesial (15.8±2.97 µm), distal (16.7±3.23 µm), and incisal (20.6±2.36 µm) for shoulder margin design. For feather‐edge designs, M‐Zr excelled in all areas: cervical (29.5±2.71 µm), mesial (15.8±2.97 µm), distal (17.2±2.65 µm), and incisal (45.3±3.97 µm). Statistically significant differences in internal adaptation were found among the 3 groups (p < 0.001). M‐Zr demonstrated the best internal adaptation in the cervical third (shoulder margin: 25.3±1.49 µm, feather‐edge: 19.2±3.52 µm) and middle third (shoulder margin: 14.3±3.09 µm; feather‐edge: 14.1±2.31 µm). Trueness of M‐Zr was better than that of other groups (p < 0.001) (shoulder margin: 17.4±1.74 µm; feather‐edge 20.4±1.33 µm).Conclusions: M‐Zr veneers had the best marginal and internal adaptation of the fabrication methods and materials tested. Shoulder margin design consistently exhibited better fit across all three materials. The marginal and internal adaptations for the three materials were within the acceptable clinical range.
- 25 March 2025
- Published by Wiley in Journal of Prosthodontics
Influence of shoulder margin and feather‐edge incisal preparations on the marginal and internal adaptation of laminate veneers fabricated with three manufacturing techniques
Purpose: To compare the marginal and internal adaptation of shoulder margin and feather‐edge 3D‐printed veneers with milled zirconia and pressed lithium disilicate laminate veneers.Materials and Methods: Veneer preparations were made on the right and left maxillary incisors using shoulder margin and feather‐edge designs. The preparations were scanned to create the reference standard tessellation language (STL) file. Ninety laminate veneers were fabricated for each preparation design using 3D‐VS (3D‐printing Varseosmile), M‐Zr (milled zirconia), and P‐LD (pressed lithium disilicate). All veneers were digitized to generate test STL files, which were then used to measure 3D deviations from the reference file with a 3D software program. Marginal and internal adaptation, as well as trueness, were assessed. Color maps were produced to quantify the mean ± standard deviation of the 3D deviations between the reference and test STL files.Results: The marginal discrepancy was significantly higher in the feather‐edge design than in the shoulder margin design across all groups (p < 0.001). M‐Zr exhibited the best marginal adaptation in all four measured areas: cervical (30.2±4.02 µm), mesial (15.8±2.97 µm), distal (16.7±3.23 µm), and incisal (20.6±2.36 µm) for shoulder margin design. For feather‐edge designs, M‐Zr excelled in all areas: cervical (29.5±2.71 µm), mesial (15.8±2.97 µm), distal (17.2±2.65 µm), and incisal (45.3±3.97 µm). Statistically significant differences in internal adaptation were found among the 3 groups (p < 0.001). M‐Zr demonstrated the best internal adaptation in the cervical third (shoulder margin: 25.3±1.49 µm, feather‐edge: 19.2±3.52 µm) and middle third (shoulder margin: 14.3±3.09 µm; feather‐edge: 14.1±2.31 µm). Trueness of M‐Zr was better than that of other groups (p < 0.001) (shoulder margin: 17.4±1.74 µm; feather‐edge 20.4±1.33 µm).Conclusions: M‐Zr veneers had the best marginal and internal adaptation of the fabrication methods and materials tested. Shoulder margin design consistently exhibited better fit across all three materials. The marginal and internal adaptations for the three materials were within the acceptable clinical range.
- Open Access
- 1 January 2025
- Published by Japan Prosthodontic Society in Journal of Prosthodontic Research
- Vol. 69 (3) , 331-338
Outcomes of surveyed monolithic CAD/CAM zirconia crowns for removable partial denture abutments: A 7-year clinical study
Purpose: This retrospective clinical study aimed to evaluate the clinical outcomes of surveyed monolithic computer-aided design and computer-aided manufacturing (CAD/CAM) zirconia crowns for abutment teeth in removable partial dentures (RPDs).Methods: Patients who received monolithic surveyed zirconia crowns were clinically examined. The crowns were examined according to the modified United States Public Health Service criteria, and Kaplan-Meier survival was determined. The effect of different variables on the survival and success rates was assessed using Cox regression analysis (α = 0.05).Results: A total of 297 crowns of 275 patients were evaluated over a mean period of 7 years. The cumulative survival and success rates were 95.6% and 91.2%, respectively. Complications were in the form of secondary caries (n=12), minor chipping (n=9), and debonding (n=5). A higher number of failures was observed in the mandibular molars (P < 0.05).Conclusions: Surveyed monolithic zirconia crowns demonstrated high survival after 7 years of service. Monolithic zirconia is an excellent alternative to metal ceramic crowns for RPD abutments.
- 1 January 2025
- Published by Japan Prosthodontic Society in Journal of Prosthodontic Research
- Vol. 69 (3) , 331-338
Open AccessOutcomes of surveyed monolithic CAD/CAM zirconia crowns for removable partial denture abutments: A 7-year clinical study
Purpose: This retrospective clinical study aimed to evaluate the clinical outcomes of surveyed monolithic computer-aided design and computer-aided manufacturing (CAD/CAM) zirconia crowns for abutment teeth in removable partial dentures (RPDs).Methods: Patients who received monolithic surveyed zirconia crowns were clinically examined. The crowns were examined according to the modified United States Public Health Service criteria, and Kaplan-Meier survival was determined. The effect of different variables on the survival and success rates was assessed using Cox regression analysis (α = 0.05).Results: A total of 297 crowns of 275 patients were evaluated over a mean period of 7 years. The cumulative survival and success rates were 95.6% and 91.2%, respectively. Complications were in the form of secondary caries (n=12), minor chipping (n=9), and debonding (n=5). A higher number of failures was observed in the mandibular molars (P < 0.05).Conclusions: Surveyed monolithic zirconia crowns demonstrated high survival after 7 years of service. Monolithic zirconia is an excellent alternative to metal ceramic crowns for RPD abutments.
- 1 June 2024
- Vol. 55 (6) , 430-440
Applications of artificial intelligence in restorative dentistry: a scoping review
Objective: Artificial intelligence (AI) applications in restorative dentistry have remarkably increased in the past 5years. This review outlines the applications, promises, and limitations of AI in the most performed procedures in restorative dentistry. Method and materials: An electronic search was performed in four databases: MEDLINE/PubMed, Embase, Web of Science, and Scopus. The search included articles published in English language without date restriction. Two independent reviewers assessed the eligibility of the studies and performed data extraction. Any discrepancy was resolved by the consensus of a third reviewer. Results: A total of 33 studies were included in this review. For Al applications in restorative dentistry, the included studies were classified into three main groups: (1) diagnosis, detection, and prediction of the disease, (2) detection and prediction of the longevity of dental restorations, and (3) teeth detection and treatments. For each study, the Al model, type of dataset, sample size, and main results (accuracy, precision, sensitivity, and specificity) were reported. Conclusions: Al systems are promising as advantageous aids for diagnosis, prediction, and treatment in dentistry, with a high degree of accuracy. Despite the Al promises, several limitations are still unresolved and must be addressed to bridge the gap between technology and clinical applications.
- 1 June 2024
- Vol. 55 (6) , 430-440
Applications of artificial intelligence in restorative dentistry: a scoping review
Objective: Artificial intelligence (AI) applications in restorative dentistry have remarkably increased in the past 5years. This review outlines the applications, promises, and limitations of AI in the most performed procedures in restorative dentistry. Method and materials: An electronic search was performed in four databases: MEDLINE/PubMed, Embase, Web of Science, and Scopus. The search included articles published in English language without date restriction. Two independent reviewers assessed the eligibility of the studies and performed data extraction. Any discrepancy was resolved by the consensus of a third reviewer. Results: A total of 33 studies were included in this review. For Al applications in restorative dentistry, the included studies were classified into three main groups: (1) diagnosis, detection, and prediction of the disease, (2) detection and prediction of the longevity of dental restorations, and (3) teeth detection and treatments. For each study, the Al model, type of dataset, sample size, and main results (accuracy, precision, sensitivity, and specificity) were reported. Conclusions: Al systems are promising as advantageous aids for diagnosis, prediction, and treatment in dentistry, with a high degree of accuracy. Despite the Al promises, several limitations are still unresolved and must be addressed to bridge the gap between technology and clinical applications.
- 8 May 2024
- Published by Elsevier in The Journal of Prosthetic Dentistry
- Vol. 134 (4) , 1125-1132
Clinical and radiographical evaluation of CAD-CAM crowns with and without deep margin elevation: 10-year results
- 8 May 2024
- Published by Elsevier in The Journal of Prosthetic Dentistry
- Vol. 134 (4) , 1125-1132
Clinical and radiographical evaluation of CAD-CAM crowns with and without deep margin elevation: 10-year results
- 5 May 2024
- Published by Elsevier in Journal of Dentistry
- Vol. 146, 105045
Effect of different impression coping and scan body designs on the accuracy of conventional versus digital implant impressions: An in vitro study
- 5 May 2024
- Published by Elsevier in Journal of Dentistry
- Vol. 146, 105045
Effect of different impression coping and scan body designs on the accuracy of conventional versus digital implant impressions: An in vitro study
- Open Access
- 1 January 2023
- Published by XMLink in The Journal of Advanced Prosthodontics
- Vol. 15 (1) , 44-54
Six-year clinical performance of lithium disilicate glass-ceramic CAD-CAM versus metal-ceramic crowns
Aziz A, et al. J Adv Prosthodont. 2023 Feb;15(1):44-54. https://doi.org/10.4047/jap.2023.15.1.44
- 1 January 2023
- Published by XMLink in The Journal of Advanced Prosthodontics
- Vol. 15 (1) , 44-54
Open AccessSix-year clinical performance of lithium disilicate glass-ceramic CAD-CAM versus metal-ceramic crowns
Aziz A, et al. J Adv Prosthodont. 2023 Feb;15(1):44-54. https://doi.org/10.4047/jap.2023.15.1.44