Extraction Induced by Emulsion Breaking for Ca, Cu, Fe, Mn, Ni, and Zn Determination in Chocolate by Flame Atomic Absorption Spectrometry
- 26 April 2022
- journal article
- research article
- Published by Oxford University Press (OUP) in Journal of AOAC INTERNATIONAL
- Vol. 105 (5) , 1299-1308
Abstract
Chocolate is a rich source of essential and non-essential elements. A new liquid–liquid extraction (LLE) approach, extraction induced by emulsion breaking (EIEB), is proposed in which the analyzed elements are transferred from the organic phase to the aqueous phase before measurement by flame atomic absorption spectrometry (FAAS). To compare EIEB to microwave digestion (MWD) for extraction of elements from chocolate prior to FAAS. EIEB parameters were varied to optimize the procedure. EIEB-FAAS was then compared to MWD-FAAS for the analysis of Ca, Cu, Fe, Mn, Ni, and Zn in milk and dark chocolate samples. A certified reference material (NIST 2384, baking chocolate) was analyzed to determine the recoveries of Ca, Cu, Fe, Mn, and Zn by the two methods. The optimized EIEB extraction method involves dilution of tempered chocolate with toluene, ultrasonic emulsification with acidified Triton X-114, breaking the emulsion by heating, and centrifugation to produce two well-defined phases. Analysis of dark and milk chocolate samples showed similar repeatability by EIEB-FAAS (RSDr 0.3 to 6.6% in dark and 0.5 to 8.7% in milk) and MWD-FAAS (RSDr 0.5 to 5.4% in dark and 0.7 to 10.2% in milk), with no significant difference detected between the methods for analysis of Ca, Cu, Fe, Mn, Ni, and Zn based on Student’s t-test. Analysis of NIST 2384 baking chocolate certified reference material for Ca, Cu, Fe, Mn, and Zn demonstrated recoveries of 98.6 to 99.5% for EIEB-FAAS compared to 95.8 to 98.6% for MWD-FAAS. EIEB-FAAS was shown to provide high recovery and excellent repeatability for accurate determination of Ca, Cu, Fe, Mn, Ni, and Zn from dark and milk chocolates. The EIEB-FAAS method is simpler and requires fewer reagents compared to other sample preparation methods and allows the calibration to be carried out using aqueous calibration solutions.Keywords
Funding Information
- Scientific Research Projects of Trakya University (TUBAP-2017/226)
This publication has 47 references indexed in Scilit:
- Assessment of trace metal contents in chocolate samples by Atomic Absorption SpectrometryJournal of Trace Element Analysis, 2012
- Determination of aluminum, copper and manganese content in chocolate samples by graphite furnace atomic absorption spectrometry using a microemulsion techniqueJournal of Food Composition and Analysis, 2011
- Determination of sodium, potassium, calcium, magnesium, zinc and iron in emulsified chocolate samples by flame atomic absorption spectrometryFood Chemistry, 2011
- Extraction induced by emulsion breaking: a novel strategy for the trace metals determination in diesel oil samples by electrothermal atomic absorption spectrometryJournal of Analytical Atomic Spectrometry, 2010
- Slurry Sampling—An Analytical Strategy for the Determination of Metals and Metalloids by Spectroanalytical TechniquesApplied Spectroscopy Reviews, 2010
- Pre-concentration procedure for determination of copper and zinc in food samples by sequential multi-element flame atomic absorption spectrometryTalanta, 2008
- Factors influencing rheological and textural qualities in chocolate – a reviewTrends in Food Science & Technology, 2007
- Determination of trace element contents of baby foods from TurkeyFood Chemistry, 2007
- Current Status of Direct Solid Sampling for Electrothermal Atomic Absorption Spectrometry—A Critical Review of the Development between 1995 and 2005Applied Spectroscopy Reviews, 2006
- Lead, cadmium and nickel in chocolates and candies from suburban areas of Mumbai, IndiaJournal of Food Composition and Analysis, 2005