Abstract
Sintering shrinkage in recycled WC–Co hardmetal alloys has been investigated for two recycling routes: zinc reclaim and oxidation–reduction–carburization (ORC) and compared with virgin reference materials. Recycled powders are strongly agglomerated and exhibit significantly lower specific surface areas, making milling essential to enhance sinterability. Two stages are identified during solid-state sintering: up to 1000 ºC, densification is controlled by oxide content and specific surface area, while lattice strain plays a minor role. At higher temperatures, solid-state shrinkage kinetics become similar for virgin and recycled materials due to defect annealing and reduced surface area. Liquid-phase formation accelerates densification in virgin alloys, whereas an opposite trend is observed in recycled powders—especially ORC—due to a shift of solid-state diffusion to higher temperatures, which promotes overlap with liquid-phase rearrangement and solution–reprecipitation processes.