Triangular-Shaped 5-DOF Piezoelectric Robot for Optical Lens Positioning
Open Access
- 27 February 2022
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 12 (5) , 2498
Abstract
The paper represents numerical and experimental investigations on a 5-DOF piezoelectric robot that can provide rotary and planar motions of the payload. The design of the robot is based on a single piezoelectric ring and a triangular-shaped passive layer made from stainless steel. Six semispherical contacts of alumina oxide were used as contact points for rotary and planar motions. Finally, the top electrode of the piezo ceramic ring was divided into six equal segments to control the 3-DOF angular and 2-DOF planar motions of the payload. Two harmonic signals of different frequencies are used to drive the piezoelectric robot. The robot operation is based on the excitation of the third radial vibration mode of the ring and the first bending mode of the trapezoidal-shaped cantilever. Motion control is performed by switching electric signals between the particular segments of the piezoelectric ring. A numerical investigation was performed to validate the operation principle of the robot and to analyze electrical and mechanical characteristics. Numerical investigations showed that the first bending mode of trapezoidal cantilevers and the third radial mode of the piezo ceramic ring were obtained at a frequency of 13.79 kHz and 95.75 kHz, respectively. Moreover, it was revealed that the coupling ratio between vibration amplitudes of passive and active segments is more than 4 times. The prototype of the piezoelectric robot was made and an experimental study was performed to validate the operating principle of the robot, as well as to investigate the dynamic characteristics. The investigation showed that the highest velocity of the planar motion is 22.3 mm/s while the maximum angular motion speed is 29.3 RPM when an excitation voltage of 200 Vp-p and payload of 25.1 g was applied.Keywords
Funding Information
- European Social Fund Plus (09.3.3-LMT-K-712-19-0082)
This publication has 23 references indexed in Scilit:
- Adaptive High-Order Terminal Sliding Mode Control Based on Time Delay Estimation for the Robotic Manipulators With Backlash HysteresisIEEE Transactions on Systems, Man, and Cybernetics: Systems, 2019
- A Novel Impact Rotary–Linear Motor Based on Decomposed Screw-Type Motion of Piezoelectric ActuatorApplied Sciences, 2018
- Development of a three-DOF piezoelectric actuator using a thin cross-beam vibratorInternational Journal of Mechanical Sciences, 2018
- Review on Multi-Degree-of-Freedom Piezoelectric Motion StageIEEE Access, 2018
- Robot manipulator control using neural networks: A surveyNeurocomputing, 2018
- Design and control of a 6-degree-of-freedom precision positioning systemRobotics and Computer-Integrated Manufacturing, 2017
- Design and simulation of a novel impact piezoelectric linear-rotary motor2016
- Design of Translation Rotary Ultrasonic Motor with Slanted Piezoelectric CeramicsJapanese Journal of Applied Physics, 2011
- Rotary-linear piezoelectric microactuator with a cubic stator of side length 3.5 mmIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 2010
- Miniature piezoelectric motorsSensors and Actuators A: Physical, 2003