Peculiarities of drilling hard rocks using hydraulic shock technology
- 30 October 2022
- journal article
- research article
- Published by Dnipro University of Technology in Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu
- No. 5,p. 20-25
Abstract
Purpose. To test the theoretical provisions for calculating the geometric and gas-dynamic parameters of a hydropulse apparatus for strikers using core pipes. Methodology. The research methodology is based on the tests carried out. The tests were conducted between January 6, 2021, and April 28, 2021. The type of test is laboratory bench trials. In the course of the study, methods of synthesis and analysis of information were applied. Finding. The basic design parameters of a hydro-pulse generator capable of operating efficiently with impact machines were obtained during the bench research. The optimal scheme of air flow distribution at the exhaust of the hydraulic hammer has been established. The optimal value of the pressure drop in the operating and blocking modes of operation of the generator is determined. In addition, the optimal value of the ejection coefficient in these two modes of operation of the generator was determined. Originality. The article investigated the technologies of drilling hard rocks in order to optimise the basic geometric parameters of the hydraulic pulse generator, to distribute the working flow in front of the jet blower, to measure the value of the ejection coefficient and pressure drop to clarify the composition and methodology of experiments in borehole conditions. Practical value. The presented study can be used to optimise the drilling technology as well as a basis for training specialists in the field of hard rock drilling using hydraulic percussion technology.Keywords
This publication has 13 references indexed in Scilit:
- EXPERIMENTAL STUDY OF ROCK DESTRUCTION BY ECCENTRIC IMPACT PULSES DURING ROTARY-PERCUSSION DRILLINGBulletin of the Tomsk Polytechnic University Geo Assets Engineering, 2020
- Percussion characteristic analysis for hydraulic rock drill with no constant-pressurized chamber through numerical simulation and experimentAdvances in Mechanical Engineering, 2019
- Design and numerical analysis of a large‐diameter air reverse circulation drill bit for reverse circulation down‐the‐hole air hammer drillingEnergy Science & Engineering, 2019
- Variation in Energy and Production Data of Pneumatic Percussive Machines in the UplandsJournal of Mining Science, 2018
- Penetration Rate and Specific Energy Prediction of Rotary–Percussive Drills Using Drill Cuttings and Engineering Properties of Selected Rock UnitsJournal of Mining Science, 2018
- Fault Diagnosis Research on Impact System of Hydraulic Rock Drill Based on Internal Mechanism Testing MethodShock and Vibration, 2018
- Analysis of Dynamics and Characteristics of Main Classes of Self-Oscillating Volume-Type Hydraulic Impact SystemsJournal of Machinery Manufacture and Reliability, 2018
- Monitoring of Drill System Behavior for Water-Powered In-The-Hole (ITH) DrillingMinerals, 2017
- Analysis and optimization of the working parameters of the impact mechanism of hydraulic rock drill based on a numerical simulationInternational Journal of Precision Engineering and Manufacturing, 2017
- Progressive Technologies of Coal, Coalbed Methane, and Ores Mining2014