Devising a calculation method for modern structures of current-conducting elements in large electric machines in a three-dimensional statement
Open Access
- 21 August 2024
- journal article
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 4 (1 (130)) , 87-96
Abstract
The jumpers of rotor pole-to-pole connections are highly stressed elements in a hydraulic generator structure. These assemblies often fail due to deformation that exceeds the size of an air gap. Existing methods do not take into account the thermal component and attempts to improve the design are not based on mathematical models that make it possible to perform calculations with an accuracy of more than 50 %. The method devised in this work makes it possible to obtain boundary conditions of the third kind on the basis of three-dimensional mathematical modeling of the ventilation system of the hydraulic unit without simplifications. The method accuracy is explained by taking into account the spatial thermal component. The heat transfer coefficient determined by this method in the pole-to-pole connections area was ~250 W/(m2·K). Using FEM, mathematical modeling of the thermal stress state of pole-to-pole connections was carried out, taking into account mechanical and thermal factors. This made it possible to design the improved connection structure with additional fastening elements, which make it possible to reduce the displacement to 0.03 mm, and the stress to 53 MPa at the rotor rotation frequency of 880 rpm. This design makes it possible to enable reliable operation of the hydraulic unit under the condition of increasing the rotor rotation frequency to overspeed with disconnected combinatorial dependence, provided that the actual stresses are 0.95 % of the material yield strength. The convergence of the values obtained by the proposed method and by the HSS method exceeded 99 %. The practical result is the proposals for the hydraulic generator design modernizationKeywords
This publication has 27 references indexed in Scilit:
- ROTOR INSPECTION2020
- System Reliability Theory2020
- Energy Storage2019
- Design of Smart Power Grid Renewable Energy Systems2019
- CFD analysis of turbulent convective heat transfer in a hydro-generator rotor-stator systemApplied Thermal Engineering, 2018
- Assessing the Operation of the Cooling Water System of a Hydro-Power Plant Using EPANETEnergy Procedia, 2017
- DC-Machines2014
- Condition monitoring and fault diagnostics for hydropower plantsComputers in Industry, 2014
- Thrust Bearings in Power Generation2013
- The generalized HSS method for solving singular linear systemsJournal of Computational and Applied Mathematics, 2012