In Situ Lithiated ALD Niobium Oxide for Improved Long Term Cycling of Layered Oxide Cathodes: A Thin-Film Model Study
Authors:
- Abdessalem AribiaAAAbdessalem Aribia
- Jordi SastreJSJordi Sastre
- Xubin ChenXCXubin Chen
- Evgeniia GilshteinEGEvgeniia Gilshtein
- Moritz H. FutscherMFMoritz H. Futscher
- Ayodhya N. TiwariATAyodhya N. Tiwari
- Yaroslav E. RomanyukYRYaroslav E. Romanyuk
Open Access
- 1 April 2021
- journal article
- research article
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 168 (4) , 040513
Abstract
Protective coatings applied to cathodes help to overcome interface stability issues and extend the cycle life of Li-ion batteries. However, within 3D cathode composites it is difficult to isolate the effect of the coating because of additives and non-ideal interfaces. In this study we investigate niobium oxide (NbOx) as cathode coating in a thin-film model system, which provides simple access to the cathode-coating-electrolyte interface. The conformal NbOx coating was applied by atomic layer deposition (ALD) onto thin-film LiCoO2 cathodes. The cathode/coating stacks were annealed to lithiate the NbOx and ensure sufficient ionic conductivity. A range of different coating thicknesses were investigated to improve the electrochemical cycling with respect to the uncoated cathode. At a NbOx thickness of 30 nm, the cells retained 80% of the initial capacity after 493 cycles at 10 C, more than doubling the cycle life of the uncoated cathode film. Elemental analysis using TOF-SIMS and XPS revealed a bulk and surface contribution of the NbOx coating. These results show that in situ lithiated ALD NbOx can significantly improve the performance of layered oxide cathodes by enhancing interfacial charge transfer and inhibiting surface degradation of the cathode, resulting in better rate performance and cycle life.Keywords
All Related Versions
Funding Information
- Schweizerischer Nationalfonds zur Förderung der Wissenschaftlichen Forschung (200021_172764)
This publication has 36 references indexed in Scilit:
- Role of surface coating on cathode materials for lithium-ion batteriesJournal of Materials Chemistry, 2010
- Surface modification of cathode materials from nano- to microscale for rechargeable lithium-ion batteriesJournal of Materials Chemistry, 2010
- Nb2O5 nanobelts: A lithium intercalation host with large capacity and high rate capabilityElectrochemistry Communications, 2008
- LiNbO3-coated LiCoO2 as cathode material for all solid-state lithium secondary batteriesElectrochemistry Communications, 2007
- Cathode materials modified by surface coating for lithium ion batteriesElectrochimica Acta, 2006
- Effects of surface modification by MgO on interfacial reactions of lithium cobalt oxide thin film electrodeJournal of Power Sources, 2004
- Lithium cobalt oxide cathode film prepared by rf sputteringJournal of Power Sources, 2004
- Analysis of thin-film lithium batteries with cathodes of 50 nm to 4 μm thick LiCoO2Journal of Power Sources, 2003
- Electrochemical Stability of Thin-Film LiCoO2 Cathodes by Aluminum-Oxide CoatingChemistry of Materials, 2003
- Chemical Reaction of Lithium Surface during Immersion in LiClO4 or LiPF6 / DEC ElectrolyteJournal of the Electrochemical Society, 1997