System-level analysis of fuel production pathways from steelworks residue gases: Superstructure-based optimization and techno-economic assessment
Preprint
- 19 February 2026
- preprint
- Published by Elsevier in SSRN Electronic Journal
Abstract
The steelmaking industry generates large quantities of residue gases with substantial calorific value, yet conventional combined heat and power (CHP) use still underexploits their energetic and economic potential. This study develops a superstructure-based optimization framework for gas-to-fuels pathways that upcycle coke oven gas (COG) and Linz–Donawitz gas (LDG) into value-added fuels, namely hydrogen (H2), methanol (MeOH) and Fischer–Tropsch (FT) fuels. A technology superstructure comprising 30 alternative gas-to-fuels routes is formulated, and rigorous steady-state process models are developed in Aspen Plus to quantify mass and energy balances as well as key cost parameters. Based on these models, network optimization problems are solved to identify optimal residue gas utilization strategies under four design objectives: minimum total energy consumption, minimum fuel production cost, minimum process-level CO2-eq. emissions and maximum profit. The optimization also accounts for different residue gas availability scenarios and production scales representative of industrial steelworks. The results show that MeOH Route #5 achieves an energy efficiency of up to 82%. H2 Route #1 produces high-purity hydrogen at a unit cost of 18.0 $/MWh at medium scale, corresponding to a 68% reduction relative to current market prices. FT Route #10 yields the lowest CO2 footprint at 95 kg CO2-eq/MWh among the considered options. Overall, the proposed framework provides steel plants with practical decision-support tools to design economically viable and environmentally favorable residue gas-to-fuels portfolios, thereby enabling new revenue streams while facilitating compliance with increasingly stringent carbon regulations.Keywords
This publication has 39 references indexed in Scilit:
- Quantitative risk assessment of an amine-based CO2 capture processKorean Journal of Chemical Engineering, 2020
- Techno-economic evaluation of gas separation processes for long-term operation of CO2 injected enhanced coalbed methane (ECBM)Korean Journal of Chemical Engineering, 2018
- Techno-economic evaluation of hybrid systems of pressure swing adsorption and membrane processes for coalbed methane separationChemical Engineering Research and Design, 2016
- An improved plant-wide multiperiod optimization model of a byproduct gas supply system in the iron and steel-making processApplied Energy, 2016
- A MILP model concerning the optimisation of penalty factors for the short-term distribution of byproduct gases produced in the iron and steel making processApplied Energy, 2015
- Conceptual design of coke-oven gas assisted coal to olefins process for high energy efficiency and low CO2 emissionApplied Energy, 2014
- Hydrogen recovery from Tehran refinery off-gas using pressure swing adsorption, gas absorption and membrane separation technologies: Simulation and economic evaluationKorean Journal of Chemical Engineering, 2013
- Evaluation of the economic and environmental impact of combining dry reforming with steam reforming of methaneChemical Engineering Research and Design, 2012
- An MILP model for optimization of byproduct gases in the integrated iron and steel plantApplied Energy, 2010
- Methane steam reforming, methanation and water‐gas shift: I. Intrinsic kineticsAIChE Journal, 1989