Chanhee You
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Chanhee You has a total of 6 co-authors. Here are the top co-authors by number of shared publications:
- Jiyong Kim
Sungkyunkwan University (SKKU), Department of Chemical Engineering, Suwon, Republic of Korea
4 shared publications - Hyeon Yang1 shared publication
- Seul Ki Han
Department of Internal Medicine, Yonsei University Wonju College of Medicine, Wonju 26426, Republic of Korea
1 shared publication - Sunghoon Kim1 shared publication
- Wangyun Won
Department of Chemical and Biological Engineering, Korea University, 145 Anam-ro, Seongbuk-gu, Seoul, 02841, Republic of Korea
1 shared publication - Woochang Jeong1 shared publication
Latest Publications
- Open Access
- 20 March 2026
- Published by Elsevier in SSRN Electronic Journal
Plastic waste to sustainable aviation fuel: Enabling circular economy through integrated techno-economic, environmental, and waste management assessment
Aviation decarbonization requires scalable low-carbon fuel pathways, yet sustainable aviation fuel (SAF) production remains constrained by feedstock availability. Converting plastic waste to SAF addresses both challenges. This study presents integrated techno-economic analysis (TEA) and life cycle assessment (LCA) of plastic waste-to-SAF (PW-SAF) processes across five plastic types (LDPE, HDPE, PP, PS, and PET). Polyolefin-derived SAF demonstrates unit production costs (UPC) ranging from 1.04 to 1.21 $/kg, competitive with established SAF pathways, and net CO2 emission (NCE) intensities ranging from 13.7 to 19.1 gCO2eq/MJ, representing 42 to 58% reductions relative to the EU RED II threshold of 32.9 gCO2eq/MJ. SAF derived from aromatic plastics shows higher UPC (1.51 to 1.96 $/kg) and NCE (18.8 to 26.2 gCO2eq/MJ), yet remains viable while complying with regulatory requirements. Waste management emission (WME) ranging from 0.65 to 0.79 kgCO2eq/kg represents approximately 70% reductions compared to incineration (1.9 to 2.6 kgCO2eq/kg). These findings demonstrate that PW-SAF transforms plastic waste from a disposal liability into a decarbonization asset for aviation, establishing a new SAF pathway while delivering substantial environmental gains. Polyolefin-derived SAF achieves the highest integrated performance across economic, energy, and environmental metrics with an overall score of 4.45.
- 20 March 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessPlastic waste to sustainable aviation fuel: Enabling circular economy through integrated techno-economic, environmental, and waste management assessment
Aviation decarbonization requires scalable low-carbon fuel pathways, yet sustainable aviation fuel (SAF) production remains constrained by feedstock availability. Converting plastic waste to SAF addresses both challenges. This study presents integrated techno-economic analysis (TEA) and life cycle assessment (LCA) of plastic waste-to-SAF (PW-SAF) processes across five plastic types (LDPE, HDPE, PP, PS, and PET). Polyolefin-derived SAF demonstrates unit production costs (UPC) ranging from 1.04 to 1.21 $/kg, competitive with established SAF pathways, and net CO2 emission (NCE) intensities ranging from 13.7 to 19.1 gCO2eq/MJ, representing 42 to 58% reductions relative to the EU RED II threshold of 32.9 gCO2eq/MJ. SAF derived from aromatic plastics shows higher UPC (1.51 to 1.96 $/kg) and NCE (18.8 to 26.2 gCO2eq/MJ), yet remains viable while complying with regulatory requirements. Waste management emission (WME) ranging from 0.65 to 0.79 kgCO2eq/kg represents approximately 70% reductions compared to incineration (1.9 to 2.6 kgCO2eq/kg). These findings demonstrate that PW-SAF transforms plastic waste from a disposal liability into a decarbonization asset for aviation, establishing a new SAF pathway while delivering substantial environmental gains. Polyolefin-derived SAF achieves the highest integrated performance across economic, energy, and environmental metrics with an overall score of 4.45.
- Open Access
- 19 February 2026
- Published by Elsevier in SSRN Electronic Journal
System-level analysis of fuel production pathways from steelworks residue gases: Superstructure-based optimization and techno-economic assessment
The steelmaking industry generates large quantities of residue gases with substantial calorific value, yet conventional combined heat and power (CHP) use still underexploits their energetic and economic potential. This study develops a superstructure-based optimization framework for gas-to-fuels pathways that upcycle coke oven gas (COG) and Linz–Donawitz gas (LDG) into value-added fuels, namely hydrogen (H2), methanol (MeOH) and Fischer–Tropsch (FT) fuels. A technology superstructure comprising 30 alternative gas-to-fuels routes is formulated, and rigorous steady-state process models are developed in Aspen Plus to quantify mass and energy balances as well as key cost parameters. Based on these models, network optimization problems are solved to identify optimal residue gas utilization strategies under four design objectives: minimum total energy consumption, minimum fuel production cost, minimum process-level CO2-eq. emissions and maximum profit. The optimization also accounts for different residue gas availability scenarios and production scales representative of industrial steelworks. The results show that MeOH Route #5 achieves an energy efficiency of up to 82%. H2 Route #1 produces high-purity hydrogen at a unit cost of 18.0 $/MWh at medium scale, corresponding to a 68% reduction relative to current market prices. FT Route #10 yields the lowest CO2 footprint at 95 kg CO2-eq/MWh among the considered options. Overall, the proposed framework provides steel plants with practical decision-support tools to design economically viable and environmentally favorable residue gas-to-fuels portfolios, thereby enabling new revenue streams while facilitating compliance with increasingly stringent carbon regulations.
- 19 February 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessSystem-level analysis of fuel production pathways from steelworks residue gases: Superstructure-based optimization and techno-economic assessment
The steelmaking industry generates large quantities of residue gases with substantial calorific value, yet conventional combined heat and power (CHP) use still underexploits their energetic and economic potential. This study develops a superstructure-based optimization framework for gas-to-fuels pathways that upcycle coke oven gas (COG) and Linz–Donawitz gas (LDG) into value-added fuels, namely hydrogen (H2), methanol (MeOH) and Fischer–Tropsch (FT) fuels. A technology superstructure comprising 30 alternative gas-to-fuels routes is formulated, and rigorous steady-state process models are developed in Aspen Plus to quantify mass and energy balances as well as key cost parameters. Based on these models, network optimization problems are solved to identify optimal residue gas utilization strategies under four design objectives: minimum total energy consumption, minimum fuel production cost, minimum process-level CO2-eq. emissions and maximum profit. The optimization also accounts for different residue gas availability scenarios and production scales representative of industrial steelworks. The results show that MeOH Route #5 achieves an energy efficiency of up to 82%. H2 Route #1 produces high-purity hydrogen at a unit cost of 18.0 $/MWh at medium scale, corresponding to a 68% reduction relative to current market prices. FT Route #10 yields the lowest CO2 footprint at 95 kg CO2-eq/MWh among the considered options. Overall, the proposed framework provides steel plants with practical decision-support tools to design economically viable and environmentally favorable residue gas-to-fuels portfolios, thereby enabling new revenue streams while facilitating compliance with increasingly stringent carbon regulations.
- Open Access
- 1 January 2024
- Published by Wiley in International Journal of Energy Research
- Vol. 2024 (1)
Least‐Cost for High Renewable Energy Share in the Distributed Energy System through Integrated Supply and Demand Side Management
This study analyzes energy supply and demand‐side management strategies to increase the renewable energy share in a distributed energy system (DES), which includes demand response (DR) options and different renewable energy sources (RES) and energy storage systems (ESS). To analyze the least costs for increasing the renewable energy share by integrating the DR, RES, and ESS, four scenarios of the DES were generated. Then, a new optimization model was proposed to identify the optimal design and operation strategies, which includes maximizing the profit as an objective function subject to various constraints, such as technical capacity and electricity price. To illustrate the capability of the proposed model, this study presented a case study of the DES for the residential sector of Jeju Island, Korea. The results showed that the optimal scenario, involving the integration of the DR, RES, and ESS, shows 0.115 $/kW hr of the levelized cost of electricity and 10% of renewable energy share, which correspond to 32.7% and 31.5% improvement, respectively, compared to the baseline. Additionally, the practical strategies to meet the Korean target of the high‐share RES were discussed through a sensitivity analysis of major external factors, such as carbon tax, incentives, and the electricity trading price in electricity markets.
- 1 January 2024
- Published by Wiley in International Journal of Energy Research
- Vol. 2024 (1)
Open AccessLeast‐Cost for High Renewable Energy Share in the Distributed Energy System through Integrated Supply and Demand Side Management
This study analyzes energy supply and demand‐side management strategies to increase the renewable energy share in a distributed energy system (DES), which includes demand response (DR) options and different renewable energy sources (RES) and energy storage systems (ESS). To analyze the least costs for increasing the renewable energy share by integrating the DR, RES, and ESS, four scenarios of the DES were generated. Then, a new optimization model was proposed to identify the optimal design and operation strategies, which includes maximizing the profit as an objective function subject to various constraints, such as technical capacity and electricity price. To illustrate the capability of the proposed model, this study presented a case study of the DES for the residential sector of Jeju Island, Korea. The results showed that the optimal scenario, involving the integration of the DR, RES, and ESS, shows 0.115 $/kW hr of the levelized cost of electricity and 10% of renewable energy share, which correspond to 32.7% and 31.5% improvement, respectively, compared to the baseline. Additionally, the practical strategies to meet the Korean target of the high‐share RES were discussed through a sensitivity analysis of major external factors, such as carbon tax, incentives, and the electricity trading price in electricity markets.