Long-term alkali–silica mitigation of high-alkali concrete with cement replacements
- 1 June 2022
- journal article
- research article
- Published by Emerald Publishing in Proceedings of the Institution of Civil Engineers - Construction Materials
- Vol. 175 (3) , 125-136
Abstract
In this study, the impact of high-alkali Portland cements on the prescribed level of supplementary cementitious materials (SCMs) required in the Canadian standard for alkali–silica reaction mitigation was evaluated. On the basis of the results, for concretes containing aggregates exhibiting moderate reactivity, the maximum allowable cement alkali limit was increased from 1.00 to 1.15%. For all the levels of aggregate reactivity, cement alkali contents could be allowed up to 1.25% provided the recommended level of mitigation by SCMs was increased. In the initial laboratory study, mortar bars and concrete prisms were cast and monitored using two different reactive aggregates and recommended levels of fly ash and slag. For the concrete prism tests, the alkali contents of cements were increased to 1.25%, as per the standard, or were increased by 0.25%. Instrumented outdoor exposure concrete blocks, along with additional concrete prisms stored at different temperatures, were cast from numerous mixtures prepared with cement alkali equivalents ranging up to 1.22%. This paper reports on the long-term performance of prisms and concrete blocks after 12 and 27 years. The performance of the outdoor blocks is also compared with the predicted performance based on the results of accelerated mortar bar and concrete prism test.Keywords
This publication has 4 references indexed in Scilit:
- Preface: RILEM technical committee 258-AAA–Development of a performance-based testing conceptMaterials and Structures, 2022
- Outdoor exposure site testing for preventing Alkali-Aggregate Reactivity in concrete – a review.MATEC Web of Conferences, 2018
- Modifications to ASTM C1293 that Allow Testing of Low‑Alkali Binder SystemsACI Materials Journal, 2018
- Alkali-aggregate reactions in OntarioCanadian Journal of Civil Engineering, 2000