Discussion on the Theoretical Basis for Cross‐Over Method Applied to Downhole Wave Velocity Test
Open Access
- 1 January 2021
- journal article
- research article
- Published by Wiley in Shock and Vibration
- Vol. 2021 (1)
Abstract
At engineering practice, the theoretical basis for the cross‐over method, used to obtain shear wave arrival time in the downhole method of the wave velocity test by surface forward and backward strike, is that the polarity of P‐wave keeps the same, while the polarity of S‐wave transforms when the direction of strike inverted. However, the characteristics of signals recorded in tests are often found to conflict with this theoretical basis for the cross‐over method, namely, the polarity of the P‐wave also transforms under the action of surface forward and backward strike. Therefore, 3D finite element numerical simulations were conducted to study the validity of the theoretical basis for the cross‐over method. The results show that both shear and compression waves are observed to be in 180° phase difference between horizontal signal traces, consistent with the direction of excitation generated by reversed impulse. Furthermore, numerical simulation results prove to be reliable by the analytic solution; it shows that the theoretical basis for the cross‐over method applied to the downhole wave velocity test is improper. In meanwhile, numerical simulations reveal the factors (inclining excitation, geophone deflection, inclination, and background noise) that may cause the polarity of the P‐wave not to reverse under surface forward and backward strike. Then, as to reduce the influence factors, we propose a method for the downhole wave velocity test under surface strike, the time difference of arrival is based between source peak and response peak, and numerical simulation results show that the S‐wave velocity by this method is close to the theoretical S‐wave velocity of soil.Keywords
Funding Information
- National Natural Science Foundation of China (U2039208, U1839202)
This publication has 17 references indexed in Scilit:
- Liquefaction potential assessment of a region using different techniques (Tepebasi, Eskişehir, Turkey)Engineering Geology, 2018
- InterPACIFIC project: Comparison of invasive and non-invasive methods for seismic site characterization. Part II: Inter-comparison between surface-wave and borehole methodsSoil Dynamics and Earthquake Engineering, 2016
- Multichannel Analysis of Surface Waves and Down-Hole Tests in the Archeological “Palatine Hill” Area (Rome, Italy): Evaluation and Influence of 2D Effects on the Shear Wave VelocitySurveys in Geophysics, 2015
- Rayleigh wave nonlinear inversion based on the Firefly algorithmApplied Geophysics, 2014
- Application of Surface-Wave Methods for Seismic Site CharacterizationSurveys in Geophysics, 2011
- Shear‐wave velocity structure of upper mantle under Taiwan from the array analysis of surface wavesGeophysical Research Letters, 2005
- Surface and downhole shear wave seismic methods for thick soil site investigationsSoil Dynamics and Earthquake Engineering, 2002
- Geotechnical site characterization in the greater Memphis area using cone penetration testsEngineering Geology, 2001
- Downhole seismic logging for high-resolution reflection surveying in unconsolidated overburdenGeophysics, 1998
- Digital Filtering Techniques for Interpreting Seismic Cone DataJournal of Geotechnical Engineering, 1993