Removal of the bemacid blue E-TL using granular activated carbon from abundant biomass: adsorption isotherm, thermodynamic and kinetic studies
Authors:
Open Access
- 2 January 2024
- journal article
- research article
- Published by Brazilian Journals in STUDIES IN ENGINEERING AND EXACT SCIENCES
- Vol. 5 (1) , 2014-2039
Abstract
In this work, we were interested in the adsorption of an acid dye, Bemacid Blue E-TL by granular activated carbon based on olive stones. To shed light on the adsorption process, batch experiments were performed to study the effect of operating parameters on the adsorption process such as equilibrium time, GAC dose, pH, initial dye concentration, and temperature. The experimental results showed that the adsorption of the dye Bemacid Blue E-TL by GAC based on olive stones depends on the equilibrium time at 8 hours, the pH is 2 of the solution and the dose is 5 g.L-1. To explain the adsorption equilibrium, the experimental values were examined by Langmuir, Freundlich, and Temkin models. The equilibrium is perfectly described by the Langmuir model whose correlation coefficient is higher than 0.99. The maximum retained quantity of the Bemacid Blue E-TL is 55.6 mg.g-1. Different kinetic models such as pseudo-first order, pseudo-second order, and the intraparticle diffusion equation were used to evaluate the adsorption kinetics. The results of the kinetic modeling showed that the pseudo-second order fitted the data well, with a high coefficient of determination (R2 > 0.99) and intra-particle diffusion is not the only rate-limiting step. The thermodynamic parameter values enthalpy (ΔH°), entropy (ΔS°), and energy change (ΔG°) show that the adsorption processes are endothermic and spontaneous. The various results obtained are promising and encouraging to consider a more comprehensive study with the objective of showing that the adsorbent chosen for this study is effective and could be used as a low-cost adsorbent for acid dye removal.Keywords
This publication has 37 references indexed in Scilit:
- Sustainable mesoporous graphitic activated carbon as biosorbent for efficient adsorption of acidic and basic dyes from wastewater: Equilibrium, kinetics and thermodynamic studiesJournal of Hazardous Materials Advances, 2022
- Synthesis and application of treated activated carbon for cationic dye removal from modelled aqueous solutionArabian Journal of Chemistry, 2022
- Optimization, equilibrium, kinetics and thermodynamic study of congo red dye adsorption from aqueous solutions using iraqi porcelanite rocksHeat and Mass Transfer, 2022
- Adsorption isotherm models: Classification, physical meaning, application and solving methodChemosphere, 2020
- Adsorption of congo red on mesoporous activated carbon prepared by CO2 physical activationChinese Journal of Chemical Engineering, 2020
- Removal of mercury from natural gas by a new activated adsorbent from olive stonesThe Canadian Journal of Chemical Engineering, 2017
- Adsorption characteristics of brilliant green dye on kaolinJournal of Hazardous Materials, 2009
- Kinetic and adsorption study of acid dye removal using activated carbonChemosphere, 2007
- Use of dried sugar beet pulp for binary biosorption of Gemazol Turquoise Blue-G reactive dye and copper(II) ions: Equilibrium modelingChemical Engineering Journal, 2007
- Adsorption of basic dyes in aqueous solution by clay adsorbent from regenerated bleaching earthApplied Clay Science, 2005