MCMohammed Amin Chemrak

Mohammed Amin Chemrak

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Mohammed Amin Chemrak has a total of 41 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Study of kinetic and equilibrium reactions for the removal of 4-aminophenols by lanthanum-enhanced montmorillonite

    by Abbes Boucheta, Mohamed Boucharef, Mohammed Amin Chemrak, Yassine Chaker, Mohamed Badaoui, Mohamed Loucif, Mourad Bidaoui

    This research investigates the development and structural analysis of lanthanum-modified montmorillonite (La-MMT) as an efficient adsorbent for the removal of 4-aminophenol, a harmful contaminant in water systems. Bentonite sourced from Maghnia, Algeria, was subjected to purification and functionalization with lanthanum to improve its adsorption capabilities. The incorporation of lanthanum into the montmorillonite framework was verified using X-ray diffraction (XRD) and Fourier-transform infrared spectroscopy (FT-IR). The adsorption behavior of La-MMT was assessed under various experimental parameters, including pH, contact time, and initial 4-aminophenol concentration. The adsorption isotherms were modeled using both Langmuir and Freundlich equations. The findings indicated that the adsorption mechanism predominantly followed the Langmuir model, implying monolayer adsorption on uniform sites. Kinetic studies revealed a rapid adsorption equilibrium achieved within 65 minutes, with La-MMT exhibiting a substantially higher adsorption capacity (555.55 mg/g) compared to unmodified montmorillonite (147.27 mg/g). This enhanced adsorption efficiency is attributed to the presence of lanthanum, which promotes stronger electrostatic interactions and hydrogen bonding with the amine functional groups of 4-aminophenol. The study concludes that La-MMT demonstrates high potential for the efficient removal of 4-aminophenol from water, offering a cost-effective and environmentally friendly solution for wastewater treatment. These findings highlight the promising application of lanthanum-modified clays in environmental remediation, particularly for organic pollutants.

  • Open Access

    Synthesis, characterization, and dielectric properties of 1,2-(propanediol)-3-methylimidazolium chloride, hydrogenosulfate, and dihydrogenophosphate ionic liquids

    by Yassine Chaker, Abdelkader Benabdellah, Mansour Debdab, El Habib Belarbi, Boumediene Haddad, Mohamed Kadari, Albert Nguyen Van Nhien, Abdelhalim Zoukel, Mohammed Amin Chemrak, Serge Bresson

    In this work, three 12-(propanediol)-3-methylimidazolium-based ionic liquids (ILs), each with a different anion-chloride ([Cl⁻]), hydrogen sulfate ([HSO₄⁻]), and dihydrogen phosphate ([H₂PO₄⁻])-were synthesized and thoroughly characterized. Structural integrity and purity were confirmed through ¹H and ¹³C nuclear magnetic resonance (NMR) and Fourier-transform infrared (FTIR) spectroscopy. Differential scanning calorimetry (DSC) analyses revealed distinct thermal behaviors, with each IL exhibiting unique melting and glass transition temperatures. The ionic conductivity was measured over a temperature range of 300K to 400K, showing that the choice of anion significantly influences conductivity. The IL with [H₂PO₄⁻] demonstrated the highest conductivity, attributed to its smaller ionic size and lower viscosity, followed by [Cl⁻], while [HSO₄⁻] displayed the lowest. Conductivity increased with rising temperature and frequency, reflecting greater ionic mobility in higher temperature and frequency conditions. These findings underscore the importance of anion selection in optimizing IL performance, particularly for applications requiring efficient ion transport, such as in electrochemical devices. The study highlights how molecular structure affects key properties like thermal stability and ionic transport, offering valuable insights for the design of ILs with tailored thermal and electrical characteristics. This research provides a foundational understanding of how the anionic component impacts the physicochemical properties of ILs, contributing to the development of new materials for energy storage, catalysis, and other advanced technologies requiring precise control over ionic conductivity and thermal properties.


  • Open Access

    AI-Driven context classification in mobile computing: methodologies and technologies for enhanced user experience

    by Hichem Chaalal, Mohammed Amin Chemrak, Fouad Khatemi

    This research explores the incorporation of sophisticated artificial intelligence (AI) methodologies, with a specific focus on deep learning approaches like Convolutional Neural Networks (CNNs), to improve context-aware computing in mobile settings. The proliferation of mobile devices in daily life has led to the generation of substantial amounts of contextual information, facilitated by integrated sensors like accelerometers, GPS, and cameras. The capacity to effectively categorize and react to this data in real time is essential for enhancing user experiences that are both personalized and responsive. Traditional methods of context classification often fall short in handling the complexities of dynamic and heterogeneous mobile data. This research explores how AI, specifically CNNs, can address these limitations by analyzing multi-source sensor inputs and providing robust, real-time context classification. The study further examines the implementation of AI-driven context-aware systems across various applications, including healthcare and transportation, demonstrating their potential to improve user experience and safety significantly. it brings to light the difficulties associated with ensuring data privacy and security, along with the imperative for effective data processing solutions in mobile settings that face resource constraints. By focusing on the development and application of AI methodologies for context classification, this research offers insights into overcoming the challenges associated with adaptive mobile computing systems, ultimately contributing to the advancement of more intelligent and efficient context-aware technologies.


  • Open Access

    Fixed-bed natural gas CO2 adsorption performance of ZSM-5 zeolites impregnated with amines

    by Mohamed Loucif, Mourad Bidaoui, Ahmed Fedag, Mohammed Amin Chemrak, Yassine Chaker, Meriem Bouabib, Asma Deba, Abdallah Ben Rhaiem, Abderrazek Oueslati, Abdelfattah Mahmoud, et al.

    This research studies the fixed-bed natural gas carbon dioxide (CO2) adsorption performance of ZSM-5 zeolites impregnation with different amines: monoethanolamine (MEA), ethylenediamine (ED), ethylenediaminetetraacetic acid (EDTA), and 4-aminophenol. The structural, morphological, and performance characteristics of the modified zeolites were examined through the use of several analytical techniques. These techniques featured Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC). The thermogravimetric analysis revealed weight losses in two stages linked to the removal of bound water molecules and the breakdown of the hydroxyl structure. Through fixed bed adsorption experiments, it was discovered that ZSM-5 zeolites functionalized with MEA/ED showed the CO2 adsorption capacity. This study investigated how well four different mathematical models—Clark, Yoon-Nelson, Thomas, and Adams-Bohart—could predict CO2 adsorption breakthrough curves from natural gas using non-linear regression methods. The results showed that all models had very high adjusted determination coefficients (Adj. R²) of over 0.99, indicating they matched the experimental data really well for various adsorbents. The analysis highlighted the models' effectiveness in reflecting adsorption kinetics and capacities, particularly noting the superior performance of the Thomas, Adams-Bohart, and Yoon-Nelson models in capturing uniform breakthrough behaviors. These findings underscore the models' utility in enhancing CO2 removal processes in natural gas purification, which is pivotal for optimizing industrial gas processing systems. These results highlight the efficiency of amine-functionalized ZSM 5 zeolites in capturing CO2 from natural gas streams.

  • Open Access

    Removal of the bemacid blue E-TL using granular activated carbon from abundant biomass: adsorption isotherm, thermodynamic and kinetic studies

    by Mokhtar Benzekri Benallou, Zohra Mekibes, Nadia Douara, Mohammed Amin Chemrak, Mourad Termoul, Salima Attouti, Noureddine Benderdouche, Benaouda Bestani

    In this work, we were interested in the adsorption of an acid dye, Bemacid Blue E-TL by granular activated carbon based on olive stones. To shed light on the adsorption process, batch experiments were performed to study the effect of operating parameters on the adsorption process such as equilibrium time, GAC dose, pH, initial dye concentration, and temperature. The experimental results showed that the adsorption of the dye Bemacid Blue E-TL by GAC based on olive stones depends on the equilibrium time at 8 hours, the pH is 2 of the solution and the dose is 5 g.L-1. To explain the adsorption equilibrium, the experimental values were examined by Langmuir, Freundlich, and Temkin models. The equilibrium is perfectly described by the Langmuir model whose correlation coefficient is higher than 0.99. The maximum retained quantity of the Bemacid Blue E-TL is 55.6 mg.g-1. Different kinetic models such as pseudo-first order, pseudo-second order, and the intraparticle diffusion equation were used to evaluate the adsorption kinetics. The results of the kinetic modeling showed that the pseudo-second order fitted the data well, with a high coefficient of determination (R2 > 0.99) and intra-particle diffusion is not the only rate-limiting step. The thermodynamic parameter values enthalpy (ΔH°), entropy (ΔS°), and energy change (ΔG°) show that the adsorption processes are endothermic and spontaneous. The various results obtained are promising and encouraging to consider a more comprehensive study with the objective of showing that the adsorbent chosen for this study is effective and could be used as a low-cost adsorbent for acid dye removal.


  • Open Access

    Experimental study of the mechanical and optical properties of glass-polyester fiber composite based on response surface methodology

    by Djamila Mokhtar, Malika Medjahdi, Noureddine Benderdouche, Mohammed Amin Chemrak, Belaid Mechab, Benaouda Bestani, Dominique Baillis

    Nossa empresa trabalha com publicações de artigos acadêmicos em revistas científicas especializadas e indexadas. Assim como artigos científicos e anais de congressos, encontros ou simpósios acadêmicos, ou textos independentes, todos em forma de livros eletrônicos e impressos.Também fazemos seleções de artigos referências em algumas áreas para organização de livros temáticos. Ainda, nossa empresa trabalha com traduções científicas inglês-português e português-inglês, além de traduções juramentadas.

  • Open Access

    An experimental investigation to predict the durability of polyester-glass fiber composite subjected to tensile loading

    by Djamila Mokhtar, Malika Medjahdi, Belaid Mechab, Noureddine Benderdouche, Benaouda Bestani, Mohammed Amin Chemrak

    Nossa empresa trabalha com publicações de artigos acadêmicos em revistas científicas especializadas e indexadas. Assim como artigos científicos e anais de congressos, encontros ou simpósios acadêmicos, ou textos independentes, todos em forma de livros eletrônicos e impressos.Também fazemos seleções de artigos referências em algumas áreas para organização de livros temáticos. Ainda, nossa empresa trabalha com traduções científicas inglês-português e português-inglês, além de traduções juramentadas.


  • Open Access

    Preparation and characterization of ultrafiltration membranes derived from recycled Polyethylene terephthalate (PET) bottles

    by Mohammed Amin Chemrak, Abdelkader Chougui, Mustapha Hafani, Sara Chourouk Benali, Djellal Adda Benattia, M’hammed Djennad

    The pressing need for sustainable practices and eco-friendly materials in the face of escalating environmental concerns has led to exploring the transformation of discarded polyethylene terephthalate (PET) bottles into functional ultrafiltration membranes. This research prepares and characterizes ultrafiltration membranes derived from PET bottle waste. The study involves collecting PET waste material and fabrication processes to develop asymmetric flat sheet membranes blended with varying proportions of hydrophilic polyethylene glycol (PEG) using phase inversion techniques. Rigorous characterization employing SEM, EDS analysis, and water vapor permeability (WVP) assessments examine these membranes' structural, morphological, and performance attributes. The surface analysis elucidates a notable correlation between increased PEG content and larger pore sizes, consistent with prior studies involving PEG in membrane modifications. Additionally, incorporating PEG in the casting solution elevates water vapor permeability. Ultrafiltration experiments reveal differing rejection rates, with membrane M2 exhibiting enhanced anti-fouling properties despite reduced flux compared to M3 and M4. This research lays the groundwork for repurposing PET waste into selective membrane materials, emphasizing optimization strategies to enhance membrane quality and performance for diverse operational settings.


  • Open Access

    Synthesis and application of modified membranes for efficient cationic and anionic dye elimination

    by Meriem Mansour Hafifi, Abdelkader Chougui, Mohammed Amin Chemrak, Aissa Belouatek

    This study focuses on developing ceramic ultrafiltration membranes using locally sourced kaolin clay and feldspar. An active layer composed of graphene and alkoxide is added to enhance the performance of these clay supports. This layer is thin, porous, and can vary in thickness. The support and filter layer's porous properties are characterized using SEM, DRX, ATG/ATD, XPS, and FTIR techniques. Filtration tests are conducted on modified porous tubular supports using cationic and anionic dye solutions. The filtration is performed tangentially at a pressure of 3.5 bar and a processing time of 120 minutes. The retention rates of the colored solutions are measured using a UV-visible spectrophotometer. The results show a 100% retention rate for supranol yellow and orange II at a concentration of 10-4 M, while for crystal violet and malachite green, the retention rates are 92.03% and 95.30%, respectively.