Effects of Geometrical Feature on Microstructures and Mechanical Properties of Refill Friction Stir Spot Welding 6061 Aluminum Alloy
Open Access
- 1 January 2019
- journal article
- research article
- Published by FapUNIFESP (SciELO) in Materials Research
- Vol. 22 (6)
Abstract
Refill friction stir spot welding (refill FSSW) is a solid state joining technology developed and patented by Helmholtz-Zentrum Geesthacht. Refill FSSW is a welding process suitable for spot joining lightweight materials in similar and dissimilar joint configuration. The result is a spot welded in lap configuration with minimal material loss and a flat surface with no keyhole. In the present study, refill FSSW was applied to join the similar 6061 aluminum alloy sheet with 1.25 mm thickness. The objective of this work is to investigate the influence of the hook on the microstructure and mechanical properties of the weld. The hook is a geometrical feature, formed as a result of the upward bending of the sheet interface during the sleeve plunge and retraction during welding. The weld strength had a negative correlation with the hook height, however it was concluded that the shape of hook changes according to the combination of process parameters. The highest value of the lap shear corresponded to the smallest hook height.Keywords
This publication has 7 references indexed in Scilit:
- Hook formation and mechanical properties of friction spot welding in alloy 6061-T6Journal of Materials Processing Technology, 2016
- Microstructure and mechanical properties of friction spot welded 6061-T4 aluminum alloyMaterials & Design (1980-2015), 2014
- The thermal cycle during the dissimilar friction spot welding of aluminum and magnesium alloyScripta Materialia, 2013
- Microstructural analysis of stir zone of Al alloy produced by friction stir spot weldingScience and Technology of Welding and Joining, 2008
- A sub-structural analysis of friction stir welded joints in an AA6056 Al-alloy in T4 and T6 temper conditionsMaterials Science and Engineering: A, 2007
- Intermixing in Dissimilar Friction Stir Spot WeldsMetallurgical and Materials Transactions A, 2007
- Microstructural evolution of 6063 aluminum during friction-stir weldingMetallurgical and Materials Transactions A, 1999