Durability of binary geopolymers with metakaolin and porcelain polishing residue against magnesium sulfate attack
Open Access
- 1 January 2025
- journal article
- Published by FapUNIFESP (SciELO) in Revista IBRACON de Estruturas e Materiais
- Vol. 18 (5)
Abstract
Geopolymers are emerging as alternative binders capable of incorporating various residual materials. However, further research is needed to assess the durability of these systems. This study produced geopolymer pastes with metakaolin (MK) partially replaced by porcelain polishing residue (PPR) at levels ranging from 0 to 45% by weight. The performance of these pastes was evaluated under magnesium sulfate attack over a 90-day period, using compressive strength tests, FTIR, TGA, and quantitative X-ray diffraction analyses (QXRD). Increases in compressive strength of up to 23% were observed after exposure to magnesium sulfate (30N1S1 and 45N1S1), with a similar trend across all levels of MK replacement by RPP, when compared to their respective reference samples not exposed to sulfate attack. This trend is likely related to the absence of expansive products commonly linked to sulfate attacks, such as ettringite and gypsum, as confirmed by XRD. Moreover, the SEM-EDS analysis suggests the incorporation of magnesium ions (Mg2+) into the matrix, which bond with the aluminosilicate gel, enhances its performance. These findings highlight the potential of MK and PPR-based geopolymeric materials for use in sulfate-aggressive environments, contributing to the advancement and sustainability of the construction industry.Keywords
Funding Information
- National Council for Scientific and Technological Development
- Coordination for the Improvement of Higher Education Personnel
- Santa Catarina Research Foundation
- Fundação Araucária
This publication has 45 references indexed in Scilit:
- Strategies for XRD quantitative phase analysis of ordinary and blended Portland cementsCement and Concrete Composites, 2022
- Eco-efficient cements: Potential economically viable solutions for a low-CO2 cement-based materials industryCement and Concrete Research, 2018
- Effect of slag content and activator dosage on the resistance of fly ash geopolymer binders to sulfuric acid attackCement and Concrete Research, 2018
- Sulfuric acid resistance of one-part alkali-activated mortarsCement and Concrete Research, 2018
- Effect of magnesium sulfate on the durability of limestone mortars based on quaternary blended cementsCement and Concrete Composites, 2016
- Recent durability studies on concrete structureCement and Concrete Research, 2015
- Durability of geopolymer materials in sodium and magnesium sulfate solutionsCement and Concrete Research, 2005
- Resistance of geopolymer materials to acid attackCement and Concrete Research, 2005
- The confused world of sulfate attack on concreteCement and Concrete Research, 2004
- GeopolymersJournal of Thermal Analysis and Calorimetry, 1991