Rafael Dors Sakata
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Rafael Dors Sakata has a total of 32 co-authors. Here are the top co-authors by number of shared publications:
- Paulo Ricardo de Matos
Santa Catarina State University
6 shared publications - Carlos Eduardo Maduro Campos
Department of Physics, Federal University of Santa Catarina, Rua Roberto Sampaio Gonzaga, Florianópolis 88035-972, SC, Brazil
4 shared publications - Ana Paula Kirchheim
UFRGS
2 shared publications - Erich David Rodriguez
Federal University of Santa Maria
2 shared publications - Lucas Onghero
Pós-Doutorando, PPGEC – Universidade Federal Santa Catarina/UFSC
2 shared publications - Philippe Jean Paul Gleize
Universidade Federal de Santa Catarina, Brasil
2 shared publications
Latest Publications
- Open Access
- 30 March 2026
- Published by Editorial CSIC in Materiales de Construcción
- Vol. 76 (361) , e400
Analysis of the properties of concrete produced with solid waste from the washing of ready-mix concrete trucks
Concrete batching plants generate various types of waste, including residual slurry from the washing of ready-mix concrete trucks. This study aimed to analyze the mechanical properties of concrete produced with partial substitution (10%, 20%, and 30%) of the binder by the solid waste generated from washing ready-mix concrete trucks. Waste was physically and chemically characterized, and its pozzolanic activity was evaluated. Tests were conducted to analyze the concrete for slump and specific gravity in the fresh state, and compressive strength, water absorption by immersion, void index, and specific gravity in the hardened state. It was concluded that substituting up to 20% of the binder with waste did not significantly compromise the mechanical properties, highlighting the reduction in cement consumption, which brought sustainability advantages. Furthermore, the chemical analysis indicated that the presence of phases such as C-S-H and Portlandite in waste could positively influence the properties of the concrete.
- 30 March 2026
- Published by Editorial CSIC in Materiales de Construcción
- Vol. 76 (361) , e400
Open AccessAnalysis of the properties of concrete produced with solid waste from the washing of ready-mix concrete trucks
Concrete batching plants generate various types of waste, including residual slurry from the washing of ready-mix concrete trucks. This study aimed to analyze the mechanical properties of concrete produced with partial substitution (10%, 20%, and 30%) of the binder by the solid waste generated from washing ready-mix concrete trucks. Waste was physically and chemically characterized, and its pozzolanic activity was evaluated. Tests were conducted to analyze the concrete for slump and specific gravity in the fresh state, and compressive strength, water absorption by immersion, void index, and specific gravity in the hardened state. It was concluded that substituting up to 20% of the binder with waste did not significantly compromise the mechanical properties, highlighting the reduction in cement consumption, which brought sustainability advantages. Furthermore, the chemical analysis indicated that the presence of phases such as C-S-H and Portlandite in waste could positively influence the properties of the concrete.
- 15 October 2025
- Published by Elsevier in Journal of Building Engineering
- Vol. 114
Effect of carbonation curing and Na2O concentration of metakaolin-based geopolymer concrete on efflorescence formation
- 15 October 2025
- Published by Elsevier in Journal of Building Engineering
- Vol. 114
Effect of carbonation curing and Na2O concentration of metakaolin-based geopolymer concrete on efflorescence formation
- Open Access
- 1 January 2025
- Published by FapUNIFESP (SciELO) in Revista IBRACON de Estruturas e Materiais
- Vol. 18 (5)
Durability of binary geopolymers with metakaolin and porcelain polishing residue against magnesium sulfate attack
Geopolymers are emerging as alternative binders capable of incorporating various residual materials. However, further research is needed to assess the durability of these systems. This study produced geopolymer pastes with metakaolin (MK) partially replaced by porcelain polishing residue (PPR) at levels ranging from 0 to 45% by weight. The performance of these pastes was evaluated under magnesium sulfate attack over a 90-day period, using compressive strength tests, FTIR, TGA, and quantitative X-ray diffraction analyses (QXRD). Increases in compressive strength of up to 23% were observed after exposure to magnesium sulfate (30N1S1 and 45N1S1), with a similar trend across all levels of MK replacement by RPP, when compared to their respective reference samples not exposed to sulfate attack. This trend is likely related to the absence of expansive products commonly linked to sulfate attacks, such as ettringite and gypsum, as confirmed by XRD. Moreover, the SEM-EDS analysis suggests the incorporation of magnesium ions (Mg2+) into the matrix, which bond with the aluminosilicate gel, enhances its performance. These findings highlight the potential of MK and PPR-based geopolymeric materials for use in sulfate-aggressive environments, contributing to the advancement and sustainability of the construction industry.
- 1 January 2025
- Published by FapUNIFESP (SciELO) in Revista IBRACON de Estruturas e Materiais
- Vol. 18 (5)
Open AccessDurability of binary geopolymers with metakaolin and porcelain polishing residue against magnesium sulfate attack
Geopolymers are emerging as alternative binders capable of incorporating various residual materials. However, further research is needed to assess the durability of these systems. This study produced geopolymer pastes with metakaolin (MK) partially replaced by porcelain polishing residue (PPR) at levels ranging from 0 to 45% by weight. The performance of these pastes was evaluated under magnesium sulfate attack over a 90-day period, using compressive strength tests, FTIR, TGA, and quantitative X-ray diffraction analyses (QXRD). Increases in compressive strength of up to 23% were observed after exposure to magnesium sulfate (30N1S1 and 45N1S1), with a similar trend across all levels of MK replacement by RPP, when compared to their respective reference samples not exposed to sulfate attack. This trend is likely related to the absence of expansive products commonly linked to sulfate attacks, such as ettringite and gypsum, as confirmed by XRD. Moreover, the SEM-EDS analysis suggests the incorporation of magnesium ions (Mg2+) into the matrix, which bond with the aluminosilicate gel, enhances its performance. These findings highlight the potential of MK and PPR-based geopolymeric materials for use in sulfate-aggressive environments, contributing to the advancement and sustainability of the construction industry.
- 6 May 2023
- Published by Elsevier in Materials Letters
- Vol. 345
Insights into the acting mechanism of ettringite in expansive Portland cement
- 6 May 2023
- Published by Elsevier in Materials Letters
- Vol. 345
Insights into the acting mechanism of ettringite in expansive Portland cement
- 4 October 2022
- Published by Springer Nature in Materials and Structures
- Vol. 55 (8) , 1-17
Effect of superplasticizer addition time and metakaolin source on the early-age hydration of limestone calcined clay cement (LC3)
- 4 October 2022
- Published by Springer Nature in Materials and Structures
- Vol. 55 (8) , 1-17
Effect of superplasticizer addition time and metakaolin source on the early-age hydration of limestone calcined clay cement (LC3)
- 7 May 2022
- Published by Elsevier in Cement and Concrete Composites
- Vol. 131
Strategies for XRD quantitative phase analysis of ordinary and blended Portland cements
- 7 May 2022
- Published by Elsevier in Cement and Concrete Composites
- Vol. 131
Strategies for XRD quantitative phase analysis of ordinary and blended Portland cements
- Open Access
- 1 January 2021
- Published by FapUNIFESP (SciELO) in Matéria (Rio de Janeiro)
- Vol. 26 (1)
Workability maintenance of water-reducing admixtures in high-performance pastes produced with different types of Portland cement
This work evaluated the efficiency and workability manteinance of a polyfunctional (lignosulfonate-based) and a superplasticizer (polycarboxylate-based) admixture in high-performance pastes (water/cement ratios of 0.30, 0.33 and 0.36) produced with two types of Portland cement (one pozzolanic and one high early strength). The workability of the pastes was evaluated by the mini slump test immediately after mixing, and after 20 and 40 minutes. Furthermore, the mechanical strength of pastes with fixed w/c ratio (0.36) and mini slump (130 mm), produced with the different combinations of cements and admixtures, was evaluated. The results showed that the CP IV+lignosulfonate and CP V-ARI+polycarboxylate mixes presented the best workability maintenance over time. The pastes produced with CP V-ARI presented 28-day strengths about 22% higher than those produced with CP IV, for both admixtures. In turn, the lignosulfonate-containing pastes showed strengths about 10% higher than those produced with the polycarboxylate-based admixture. Overall, it was possible to obtain the same workability for high-performance Portland cement pastes produced with both admixtures and cements; however, the workability mantainance and mechanical strength highly depends on the combination of cement and admixture used.
- 1 January 2021
- Published by FapUNIFESP (SciELO) in Matéria (Rio de Janeiro)
- Vol. 26 (1)
Open AccessWorkability maintenance of water-reducing admixtures in high-performance pastes produced with different types of Portland cement
This work evaluated the efficiency and workability manteinance of a polyfunctional (lignosulfonate-based) and a superplasticizer (polycarboxylate-based) admixture in high-performance pastes (water/cement ratios of 0.30, 0.33 and 0.36) produced with two types of Portland cement (one pozzolanic and one high early strength). The workability of the pastes was evaluated by the mini slump test immediately after mixing, and after 20 and 40 minutes. Furthermore, the mechanical strength of pastes with fixed w/c ratio (0.36) and mini slump (130 mm), produced with the different combinations of cements and admixtures, was evaluated. The results showed that the CP IV+lignosulfonate and CP V-ARI+polycarboxylate mixes presented the best workability maintenance over time. The pastes produced with CP V-ARI presented 28-day strengths about 22% higher than those produced with CP IV, for both admixtures. In turn, the lignosulfonate-containing pastes showed strengths about 10% higher than those produced with the polycarboxylate-based admixture. Overall, it was possible to obtain the same workability for high-performance Portland cement pastes produced with both admixtures and cements; however, the workability mantainance and mechanical strength highly depends on the combination of cement and admixture used.
- 1 October 2020
- Published by Elsevier in Journal of Cleaner Production
- Vol. 269
Eco-friendly ultra-high performance cement pastes produced with quarry wastes as alternative fillers
- 1 October 2020
- Published by Elsevier in Journal of Cleaner Production
- Vol. 269
Eco-friendly ultra-high performance cement pastes produced with quarry wastes as alternative fillers
- 1 November 2019
- Published by Elsevier in Construction and Building Materials
- Vol. 225, 941-955
Eco-efficient low binder high-performance self-compacting concretes
- 1 November 2019
- Published by Elsevier in Construction and Building Materials
- Vol. 225, 941-955
Eco-efficient low binder high-performance self-compacting concretes