Process-Microstructure-Property Characteristics of Aluminum Walls Fabricated by Hybrid Wire Arc Additive Manufacturing with Friction Stir Processing
Authors:
Preprint
- 31 December 2025
- preprint
- Published by MDPI AG in Preprints.org
Abstract
Wire Arc Additive Manufacturing (WAAM) is a cost-effective method for fabricating large aluminum components; however, it tends to suffer from heat accumulation and coarse anisotropic microstructures, which can limit the part's performance and its mechanical properties. In this study, a wall is fabricated using a hybrid unified additive deformation manufacturing process (UAMFSP) method, which integrates friction stir processing (FSP) into WAAM, and is compared with a WAAM-only wall fabricated by Metal Inert Gas (MIG) deposition. Based on the outcomes, Infrared (IR) thermography revealed progressive heat buildup in WAAM-only MIG walls, with peak layer temperatures of about 870 to 1000 °C and occasional clipped peaks near the IR-camera limit (~1300 °C). In contrast, in the UAMFSP process, heat was redistributed through mechanical stirring, maintaining more uniform sub-solidus profiles below approximately 400 °C. Also, optical microscopy and quantitative image analysis showed that MIG walls developed coarse, dendritic grains with a mean grain area of about 314 µm², whereas the UAMFSP produced refined, equiaxed grains with a mean grain area of about 10.9 µm², which is approximately 1.5 orders of magnitude smaller. Mechanical performance assessment through microhardness measurement confirmed that the UAMFSP process can improve the hardness by 45.8% compared to the MIG process (75.8 ± 7.7 HV vs. 52.0 ± 1.3 HV; p = 0.0027). In summary, the outcomes of this study introduce the UAMFSP process as a robust method for addressing the thermal and microstructural limitations of WAAM and improving the performance of the fabricated part. By combining deposition with plastic deformation, UAMFSP enables the fabrication of aluminum parts with fine isotropic microstructures and improved strength. These findings provide a framework for further extending hybrid additive-deformation strategies to thicker builds, alternative alloys, and service-relevant mechanical evaluations.Keywords
All Related Versions
- Version 1, 2025-12-31, Preprints
- Published version: Materials, 19 (3), 580.
This publication has 58 references indexed in Scilit:
- Hybrid construction featuring wire arc additive manufacturing: review, concepts, challenges and opportunitiesEngineering Structures, 2024
- An integrated hybrid wire-arc directed energy deposition, friction stir processing, and milling system for multi-track, multi-layer part manufacturingAdditive Manufacturing Letters, 2024
- Hybrid metal additive/subtractive machine tools and applicationsCIRP Annals, 2024
- Review on Fatigue of Additive Manufactured Metallic Alloys: Microstructure, Performance, Enhancement, and Assessment MethodsAdvanced Materials, 2023
- Wire and arc additive manufacturing of metal components: a review of recent research developmentsThe International Journal of Advanced Manufacturing Technology, 2020
- Unit block–based process planning strategy of WAAM for complex shell–shaped componentThe International Journal of Advanced Manufacturing Technology, 2019
- Idle time selection for wire-arc additive manufacturing: A finite element-based techniqueAdditive Manufacturing, 2018
- Assessing the effect of TIG alternating current time cycle on aluminium wire + arc additive manufactureAdditive Manufacturing, 2017
- A Review on Grain Refinement of Aluminum Alloys: Progresses, Challenges and ProspectsActa Metallurgica Sinica (English Letters), 2017
- Mechanism of grain refinement in aluminiumActa Metallurgica et Materialia, 1995