Process–Microstructure–Property Characteristics of Aluminum Walls Fabricated by Hybrid Wire Arc Additive Manufacturing with Friction Stir Processing
Open Access
Abstract
Wire Arc Additive Manufacturing (WAAM) is a cost-effective method for fabricating large aluminum components; however, it tends to suffer from heat accumulation and coarse anisotropic microstructures, which can limit the part’s performance. In this study, a wall is fabricated using a hybrid unified additive deformation manufacturing process (UAMFSP) method, which integrates friction stir processing (FSP) into WAAM, and is compared with a Metal Inert Gas (MIG)-based WAAM wall. Infrared (IR) thermography revealed progressive heat buildup in MIG walls, with peak layer temperatures of about 870 to 1000 °C. In contrast, in the UAMFSP process, heat was redistributed through mechanical stirring, maintaining more uniform sub-solidus profiles below approximately 400 °C. Also, optical microscopy and quantitative image analysis showed that MIG walls developed coarse, dendritic grains with a mean grain area of about 314 µm2, whereas the UAMFSP produced refined, equiaxed grains with a mean grain area of about 10.9 µm2. Microhardness measurement (Vickers HV0.2, 200 gf) confirmed that the UAMFSP process can improve the hardness by 45.8% compared to the MIG process (75.8 ± 7.7 HV vs. 52.0 ± 1.3 HV; p = 0.0027). In summary, the outcomes of this study introduce the UAMFSP process as a method for addressing the thermal and microstructural limitations of WAAM. These findings provide a framework for further extending hybrid additive–deformation strategies to thicker builds, alternative alloys, and service-relevant mechanical evaluations.Keywords
All Related Versions
This publication has 61 references indexed in Scilit:
- An integrated hybrid wire-arc directed energy deposition, friction stir processing, and milling system for multi-track, multi-layer part manufacturingAdditive Manufacturing Letters, 2024
- Hybrid metal additive/subtractive machine tools and applicationsCIRP Annals, 2024
- Review on Fatigue of Additive Manufactured Metallic Alloys: Microstructure, Performance, Enhancement, and Assessment MethodsAdvanced Materials, 2023
- Effect of surface texture, viewing angle, and surface condition on the emissivity of wire arc directed energy deposition manufactured 7075 nano treated aluminum alloyThe International Journal of Advanced Manufacturing Technology, 2023
- Oxidation in wire arc additive manufacturing of aluminium alloysAdditive Manufacturing, 2021
- Wire and arc additive manufacturing of metal components: a review of recent research developmentsThe International Journal of Advanced Manufacturing Technology, 2020
- Unit block–based process planning strategy of WAAM for complex shell–shaped componentThe International Journal of Advanced Manufacturing Technology, 2019
- Idle time selection for wire-arc additive manufacturing: A finite element-based techniqueAdditive Manufacturing, 2018
- A Review on Grain Refinement of Aluminum Alloys: Progresses, Challenges and ProspectsActa Metallurgica Sinica (English Letters), 2017
- Mechanism of grain refinement in aluminiumActa Metallurgica et Materialia, 1995