Study on Erosion Patterns of Cyclone Desanders at Shale Gas Wellheads
Open Access
Abstract
In shale gas extraction, solid particles such as fracturing proppants cause erosion in production and transmission pipelines. Cyclone desanders are widely used for gas–solid separation, but high-velocity sand-laden fluids frequently induce equipment failure, leakage and safety risks. Therefore, research on erosion and protective measures is essential. This study focuses on the desander at the M shale gas wellhead, where wall thickness was measured at three monitoring points to determine erosion rates. A CFD-based numerical erosion model for the cyclone desander was developed using ANSYS Fluent within the ANSYS Workbench 19.2 environment (ANSYS, Inc., Canonsburg, PA, USA). The model was validated by comparing simulation results with field data, revealing the distribution patterns of the velocity field, pressure field, and erosion rate. The study analyzed the impact of nine factors on desander erosion: inlet aspect ratio, cylinder radius, cone length, dust discharge port diameter, exhaust port diameter, particle size, particle concentration, inlet velocity, and operating pressure, clarifying the erosion variation patterns for each factor. SPSSAU V25.0 (Beijing Qingsi Technology Co., Ltd., Beijing, China) was employed to analyze the significance of these nine factors, identifying six significant influencing factors: inlet aspect ratio, cylinder diameter, dust discharge port diameter, particle size, particle concentration, and inlet velocity. Subsequently, response surface analysis was performed using Design-Expert 13 (Stat-Ease, Inc., Minneapolis, MN, USA) to obtain the relationship between the factors and their impact on maximum erosion, leading to the establishment of a predictive model for the maximum erosion rate. In addition, geometry optimization, local wall thickening, coating protection, material selection, and bionic rib structures were discussed as erosion-mitigation strategies. The optimized geometry reduced the erosion rate at the inlet and dust discharge outlet by 20.4% and 21.8%, respectively, while the bionic rib structure reduced the maximum erosion rate by 58%.Keywords
Funding Information
- Natural Science Foundation of Chongqing Municipality (CSTB2024NSCQ-MSX1103)
- National Natural Science Foundation of China (51904051, 52302402)
This publication has 25 references indexed in Scilit:
- Simulation study on gas-liquid-solid multiphase flow characteristics and erosion mechanism in a natural gas bendParticuology, 2025
- Numerical simulation of bedform evolution on granular sediment beds via Eulerian–Lagrangian approach in low-flow-rate horizontal duct transportInternational Journal of Multiphase Flow, 2025
- Effect of local erosion on flow pattern and particle self-rotation in a cyclone separatorAdvanced Powder Technology, 2025
- Experimental Study on the Erosion–Corrosion Synergism of Elbow in the Case of Liquid–Solid Swirling FlowJournal of Materials Engineering and Performance, 2024
- Surface facility optimization for combined shale oil and gas development strategiesOptimization and Engineering, 2022
- Effect of local erosion on the flow field and separation performance of the cyclone separatorPowder Technology, 2022
- Numerical modeling and analysis of particle-fluid flow and wall erosion in centrifugal slurry pumps under different solid concentrationsPowder Technology, 2022
- High-efficiency industrial cyclone separator: A CFD studyPowder Technology, 2020
- Numerical simulation and experimental study on internal and external characteristics of novel HydrocyclonesHeat and Mass Transfer, 2020
- Collection efficiency of cyclone separatorsAIChE Journal, 1981