On the drag reduction of an inclined wing via microstructures with the immersed boundary-lattice Boltzmann flux solver
Open Access
- 1 August 2023
- journal article
- research article
- Published by AIP Publishing in Physics of Fluids
- Vol. 35 (8)
Abstract
Flow separation control has a wide application prospect in drag reduction for industry. This paper numerically studies the effect of microstructures on flow separation and drag reduction. Simple morphological microstructures, derived from the tilted shark scales, are attached to the wing at an angle of attack. The spacing and height of microstructures are made dimensionless by using the microstructure width and half of the wing width, respectively, that is, d̃m=dm/dAB and h̃m=hm/(H/2). The angle of attack is set to 10°. It is found that microstructures can reduce the motion amplitude of shed vortices, thereby suppressing flow separation and reducing drag. Both the planar and curved microstructures have excellent drag reduction performance. The microstructure spacing d̃m and tilt angle θ should not be too large or too small; otherwise, it will weaken the drag reduction ability. Cases d̃m=1.51, θ=20°, and θ=30° exhibit excellent drag reduction performance. The microstructure has the characteristic for being small, yet it needs to reach a certain height h̃m to effectively reduce drag. The case h̃m=0.667 is the most superior choice. Based on the proposed microstructure shape and spacing, the drag reduction performance of microstructures can reach more than 28%. Meanwhile, the drag reduction performance of microstructures increases with the improvement of the attachment proportion pm, and case pm≥50% is suggested for significant drag reduction performance. Finally, we discuss the drag reduction performance of microstructures on the wing at different angles of attack and find that microstructures can achieve good drag reduction, provided that the pressure drag caused by the flow separation is a significant proportion of the total drag and the flow separation occurs within the controllable range of microstructures.Keywords
Funding Information
- National Natural Science Foundation of China (12293000)
- National Natural Science Foundation of China (12293001)
- National Natural Science Foundation of China (11988102)
- National Natural Science Foundation of China (12202015)
- National Natural Science Foundation of China (12172006)
- National Natural Science Foundation of China (12202010)
- National Natural Science Foundation of China (U2141251)
- Laoshan Laboratory (LSKJ202200500)
This publication has 70 references indexed in Scilit:
- Implicit velocity correction-based immersed boundary-lattice Boltzmann method and its applicationsJournal of Computational Physics, 2009
- Jet flow induced by a surface plasma actuatorProceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 2008
- A novel immersed boundary velocity correction–lattice Boltzmann method and its application to simulate flow past a circular cylinderJournal of Computational Physics, 2007
- A momentum exchange-based immersed boundary-lattice Boltzmann method for simulating incompressible viscous flowsPhysics Letters A, 2006
- SYNTHETIC JETSAnnual Review of Fluid Mechanics, 2002
- Gurney Flap Experiments on Airfoils, Wings, and Reflection Plane ModelJournal of Aircraft, 1998
- Direct numerical simulation of turbulent flow over a modeled riblet covered surfaceJournal of Fluid Mechanics, 1995
- Separation Control: ReviewJournal of Fluids Engineering, 1991
- Drag Reduction in NatureAnnual Review of Fluid Mechanics, 1991
- Numerical analysis of blood flow in the heartJournal of Computational Physics, 1977