ZDZengzhi Du

Zengzhi Du

*This is an algorithmically generated author record based on publicly available information.

Zengzhi Du has a total of 10 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Wake characteristics of a porous-coated wall-mounted cylinder using tomographic particle image velocimetry

    by Xia Wan, Zengzhi Du, Xu Zhou, Huiling Duan, Pengyu Lv, Yaolei Xiang

    The wake of finite wall-mounted cylinders exhibits strong three-dimensional features due to the combined influence of the free end and the base. Tomographic particle image velocimetry is used to investigate the wake of a wall-mounted cylinder coated with a 3-mm-thick, 40 pores per inch open-cell polyurethane foam layer with a nominal porosity of approximately 97% at a Reynolds number of 1280 and an aspect ratio of 4. Rather than weakening large-scale vortex structures as commonly reported for porous coatings, under the investigated condition, the porous-coated cylinder exhibits more organized and pronounced primary Kármán-type vortex shedding than the smooth cylinder baseline. This behavior is associated with systematic changes in the mean flow and turbulence statistics, including an elongated recirculation region, a downstream shift in turbulence production, and a reduced influence of three-dimensional end effects. Proper orthogonal decomposition provides further evidence for the more organized and pronounced primary Kármán-type vortex shedding, as indicated by reduced energy in modes associated with three-dimensional end effects and increased energy in the dominant Kármán-type shedding modes. This study provides new experimental insight into the three-dimensional wake dynamics of porous-coated wall-mounted cylinders.

  • Regulating turbulent separation by surface microstructures on a blunt plate

    by Zengzhi Du, An-Kang Gao, Chenxi You, Guo-Qing Chen, Yongze Liu, Hongyuan Li, Pengyu Lv, Huiling Duan

    Microstructured surfaces can induce secondary flow and regulate flow structures of the turbulent separation flow. However, the mechanism governing the relationship between the microstructure size and the characteristic flow size remains unclear. In this study, the separated flow over a blunt flat plate with surface microstructures is studied using time-resolved particle image velocimetry experiments and implicit large-eddy simulations for the plate-thickness-based Reynolds number from 5.08×103 to 1.31×104. The ratio of the height of microstructures to the plate thickness (h/d) ranges from 0.01 to 0.1. Combining experimental and numerical results, the relationships between the separation bubble size and the microstructure size under different Reynolds numbers exhibit similarity when normalized by the separation bubble size of the smooth plate. The dimensionless separation bubble size decreases when the microstructure height increases and large microstructures (h/d = 0.1) exhibit good performance on reducing the flow separation. Near the leading edge, the distortion of two-dimensional vortices and the generation of three-dimensional hairpin vortices are promoted by the first several rows of large microstructures. Additionally, in the main separation region, secondary positive spanwise vortices emerge from large microstructures. Subsequently, the secondary vortices lift up and evolve into streamwise vortices. The characteristic scale of secondary vortices is represented by a significant peak in the spectra of spanwise wavenumbers, which is of the same magnitude as the height of large microstructures. Furthermore, increasing the microstructure height weakens the streamwise correlation of the flow, and the characteristic scale of the correlation is comparable to the height of large microstructures.


  • Open Access

    On the drag reduction of an inclined wing via microstructures with the immersed boundary-lattice Boltzmann flux solver

    by Guo-Qing Chen, Zengzhi Du, Hongyuan Li, Pengyu Lv, Huiling Duan

    Flow separation control has a wide application prospect in drag reduction for industry. This paper numerically studies the effect of microstructures on flow separation and drag reduction. Simple morphological microstructures, derived from the tilted shark scales, are attached to the wing at an angle of attack. The spacing and height of microstructures are made dimensionless by using the microstructure width and half of the wing width, respectively, that is, d̃m=dm/dAB and h̃m=hm/(H/2). The angle of attack is set to 10°. It is found that microstructures can reduce the motion amplitude of shed vortices, thereby suppressing flow separation and reducing drag. Both the planar and curved microstructures have excellent drag reduction performance. The microstructure spacing d̃m and tilt angle θ should not be too large or too small; otherwise, it will weaken the drag reduction ability. Cases d̃m=1.51, θ=20°, and θ=30° exhibit excellent drag reduction performance. The microstructure has the characteristic for being small, yet it needs to reach a certain height h̃m to effectively reduce drag. The case h̃m=0.667 is the most superior choice. Based on the proposed microstructure shape and spacing, the drag reduction performance of microstructures can reach more than 28%. Meanwhile, the drag reduction performance of microstructures increases with the improvement of the attachment proportion pm, and case pm≥50% is suggested for significant drag reduction performance. Finally, we discuss the drag reduction performance of microstructures on the wing at different angles of attack and find that microstructures can achieve good drag reduction, provided that the pressure drag caused by the flow separation is a significant proportion of the total drag and the flow separation occurs within the controllable range of microstructures.