Silicone elastomers can act as effective lubricants in the paper manufacturing process. They reduce friction between paper fibers and processing equipment, such as rollers and presses, thereby helping to prevent paper breakage and improving the overall efficiency of the production line. This research focuses on the formulation and characterization of silicone elastomer-based emulsions that can be used to improve paper properties. In the first part of the investigation, Fourier transform infrared (FTIR) spectroscopy was employed to analyze the structural properties of the initial silicone elastomers. Following the successful emulsification process, a physicochemical characterization of the obtained system was performed. The quality and stability of the emulsion were evaluated through three key aspects. Particle size and the stability of the dispersed phase were investigated by dispersion analysis, which revealed a predominantly nanoscale droplet distribution with a smaller fraction of larger droplets. The oil-in-water emulsion type was accurately identified using conductometric measurements of the system's electrical conductivity. Surface properties and the interaction of the emulsion with a solid substrate were determined through contact angle measurements using an indirect method. The results indicated a low contact angle, which may present challenges for future applications. The obtained findings confirm the successful formulation of the emulsion and provide insight into the correlation between the structure of the initial elastomers and the final emulsion performance, enabling their precise application in improving paper quality.