Marijana Vasić
Marijana Vasić has a total of 9 co-authors. Here are the top co-authors by number of shared publications:
- Darko Manjenčić
Academy of Kruševac, Department of Technical and Technological Studies, Kosančićeva 36, 37000 Kruševac, Serbia
3 shared publications - Dejan Todorović
CPCE Laboratory Center for Applied Circular Economy - ELIXIR GROUP, Šabac, Serbia
2 shared publications - Marija V. Pergal
University of Belgrade, Institute of Chemistry, Technology and Metallurgy, Belgrade, Serbia
2 shared publications - Milica Ivanović
Academy Kruševac, Department of Technical and Technological Studies, Kruševac, Serbia
2 shared publications - Nevena Vukić
University of Kragujevac, Faculty of Technical Sciences, Čačak, Serbia
2 shared publications - Bojan Slavić
Academy of Kruševac, Department of Technical and Technological Studies, Kosančićeva 36, 37000 Kruševac, Serbia
1 shared publication
Latest Publications
- 1 November 2026
- Published by Faculty of Technical Sciences
- Vol. 13, 693-698
Silicone Elastomers as Additives in the Paper Manufacturing Process
Silicone elastomers can act as effective lubricants in the paper manufacturing process. They reduce friction between paper fibers and processing equipment, such as rollers and presses, thereby helping to prevent paper breakage and improving the overall efficiency of the production line. This research focuses on the formulation and characterization of silicone elastomer-based emulsions that can be used to improve paper properties. In the first part of the investigation, Fourier transform infrared (FTIR) spectroscopy was employed to analyze the structural properties of the initial silicone elastomers. Following the successful emulsification process, a physicochemical characterization of the obtained system was performed. The quality and stability of the emulsion were evaluated through three key aspects. Particle size and the stability of the dispersed phase were investigated by dispersion analysis, which revealed a predominantly nanoscale droplet distribution with a smaller fraction of larger droplets. The oil-in-water emulsion type was accurately identified using conductometric measurements of the system's electrical conductivity. Surface properties and the interaction of the emulsion with a solid substrate were determined through contact angle measurements using an indirect method. The results indicated a low contact angle, which may present challenges for future applications. The obtained findings confirm the successful formulation of the emulsion and provide insight into the correlation between the structure of the initial elastomers and the final emulsion performance, enabling their precise application in improving paper quality.
- 1 November 2026
- Published by Faculty of Technical Sciences
- Vol. 13, 693-698
Silicone Elastomers as Additives in the Paper Manufacturing Process
Silicone elastomers can act as effective lubricants in the paper manufacturing process. They reduce friction between paper fibers and processing equipment, such as rollers and presses, thereby helping to prevent paper breakage and improving the overall efficiency of the production line. This research focuses on the formulation and characterization of silicone elastomer-based emulsions that can be used to improve paper properties. In the first part of the investigation, Fourier transform infrared (FTIR) spectroscopy was employed to analyze the structural properties of the initial silicone elastomers. Following the successful emulsification process, a physicochemical characterization of the obtained system was performed. The quality and stability of the emulsion were evaluated through three key aspects. Particle size and the stability of the dispersed phase were investigated by dispersion analysis, which revealed a predominantly nanoscale droplet distribution with a smaller fraction of larger droplets. The oil-in-water emulsion type was accurately identified using conductometric measurements of the system's electrical conductivity. Surface properties and the interaction of the emulsion with a solid substrate were determined through contact angle measurements using an indirect method. The results indicated a low contact angle, which may present challenges for future applications. The obtained findings confirm the successful formulation of the emulsion and provide insight into the correlation between the structure of the initial elastomers and the final emulsion performance, enabling their precise application in improving paper quality.
- 1 January 2026
- Published by University Library in Kragujevac
Process Optimization of Alcoholic Fermentation for Enhanced Bioethanol Yield
The high consumption and exhaustion of fossil fuels in recent years due to industry and technology development has led to finding an alternative solution. Among alternative energy resources, biofuels today are a significant place, of which bioethanol has a special place as a renewable and environmentally convenient fuel. In the production of bioethanol, it is significant that it can be obtained by fermentation from renewable raw materials containing carbohydrates. The aim of this study is to determine the optimal combination of microorganism and temperature regime to achieve maximum bioethanol yield, while minimizing energy losses and reducing fermentation time. The presence of the produced bioethanol was confirmed using gas chromatography-mass spectrometry (GC-MS). Additionally, the chemical structure of ethanol and carbohydrates was investigated and verified via Fourier-transform infrared spectroscopy (FTIR), which successfully identified the characteristic functional groups. This paper investigates the effect of temperature on the fermentation process of ethanol production from cassava, using hydrolyzed starch as the carbohydrate source, with yeast cultivated on Sabouraud Maltose Agar. This study thus revealed that a temperature of 30°C and a pH of 4.8 proved most suitable for the fermentation process, resulting in a bioethanol yield of approximately 30% from both glucose and maltose syrups.
- 1 January 2026
- Published by University Library in Kragujevac
Process Optimization of Alcoholic Fermentation for Enhanced Bioethanol Yield
The high consumption and exhaustion of fossil fuels in recent years due to industry and technology development has led to finding an alternative solution. Among alternative energy resources, biofuels today are a significant place, of which bioethanol has a special place as a renewable and environmentally convenient fuel. In the production of bioethanol, it is significant that it can be obtained by fermentation from renewable raw materials containing carbohydrates. The aim of this study is to determine the optimal combination of microorganism and temperature regime to achieve maximum bioethanol yield, while minimizing energy losses and reducing fermentation time. The presence of the produced bioethanol was confirmed using gas chromatography-mass spectrometry (GC-MS). Additionally, the chemical structure of ethanol and carbohydrates was investigated and verified via Fourier-transform infrared spectroscopy (FTIR), which successfully identified the characteristic functional groups. This paper investigates the effect of temperature on the fermentation process of ethanol production from cassava, using hydrolyzed starch as the carbohydrate source, with yeast cultivated on Sabouraud Maltose Agar. This study thus revealed that a temperature of 30°C and a pH of 4.8 proved most suitable for the fermentation process, resulting in a bioethanol yield of approximately 30% from both glucose and maltose syrups.
- 1 January 2026
- Published by University Library in Kragujevac
- p. 799-809
CHEMICAL CHARACTERIZATION OF ACHILLEA MILLEFOLIUM ESSENTIAL OIL FROM THE KRUŠEVAC REGION (SERBIA)
This study provides a detailed chemical characterization and safety evaluation of Achillea millefolium essential oil collected from the Kruševac region in central Serbia. The essential oil was isolated by hydrodistillation using a Clevenger-type apparatus, yielding 0.1–0.2%. Gas chromatography–mass spectrometry (GC–MS) analysis revealed that oxygenated monoterpenes dominated the volatile fraction (31.57%), with borneol (15.20%), eucalyptol (6.58%), and camphor (3.09%) identified as the principal constituents. The obtained profile corresponds to an oxygenated monoterpene-rich chemotype and aligns with previously reported compositions of A. millefolium, while also contributing new regional phytochemical data. Inductively coupled plasma analysis confirmed very low concentrations of toxic metals, including Cd, Pb, Hg, As, and Ni, all below internationally recommended limits. The combination of a characteristic terpene profile and minimal metal contamination indicates good quality and safety of the investigated oil. These findings expand the phytochemical knowledge of Serbian medicinal flora and support the potential application of this essential oil in pharmaceutical, cosmetic, and food-related products.
- 1 January 2026
- Published by University Library in Kragujevac
- p. 799-809
CHEMICAL CHARACTERIZATION OF ACHILLEA MILLEFOLIUM ESSENTIAL OIL FROM THE KRUŠEVAC REGION (SERBIA)
This study provides a detailed chemical characterization and safety evaluation of Achillea millefolium essential oil collected from the Kruševac region in central Serbia. The essential oil was isolated by hydrodistillation using a Clevenger-type apparatus, yielding 0.1–0.2%. Gas chromatography–mass spectrometry (GC–MS) analysis revealed that oxygenated monoterpenes dominated the volatile fraction (31.57%), with borneol (15.20%), eucalyptol (6.58%), and camphor (3.09%) identified as the principal constituents. The obtained profile corresponds to an oxygenated monoterpene-rich chemotype and aligns with previously reported compositions of A. millefolium, while also contributing new regional phytochemical data. Inductively coupled plasma analysis confirmed very low concentrations of toxic metals, including Cd, Pb, Hg, As, and Ni, all below internationally recommended limits. The combination of a characteristic terpene profile and minimal metal contamination indicates good quality and safety of the investigated oil. These findings expand the phytochemical knowledge of Serbian medicinal flora and support the potential application of this essential oil in pharmaceutical, cosmetic, and food-related products.