Retarding efficiency loss upon scaling in perovskite photovoltaics as fill factor becomes the bottleneck
Open Access
- 29 October 2026
- journal article
- research article
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Abstract
Perovskite solar cells approach crystalline-silicon efficiencies at small areas, yet substantial performance losses during scale-up hinder their translation into practical modules. Here we quantify the contributions of device-performance parameters to efficiency loss during scale-up across diverse perovskite technologies, identifying fill factor ( $${FF}$$ ) as a major contributor and target for mitigating this loss. Further analysis resolves the FF deficit into voltage-, diode-non-ideality- and transport-associated contributions. Cryo-controlled processing provides an experimental route to preserve $${FF}$$ by regulating intermediate-phase evolution during crystallization. The resulting $${FF}$$ -preservation advantage arises predominantly from reduced diode non-ideality, with the other contributions being smaller. This advantage increases across device scales. A mini-module (19.48 cm 2 aperture) achieves a record certified steady-state efficiency of 23.9% with an $${FF}$$ of 83.3%, the highest reported for perovskite modules. The same $${FF}$$ limitation governs operational performance decay, linking efficiency retention during scale-up with long-term stability. Together, these results establish $${FF}$$ preservation and the factors governing it as central to mitigating performance loss during scale-up and operation.
Keywords
This publication has 54 references indexed in Scilit:
- Retarding the Growth Kinetics of Chemical Bath Deposited Nickel Oxide Films for Efficient Inverted Perovskite Solar Cells and MinimodulesAdvanced Materials, 2025
- High‐Efficiency Large‐Area Perovskite Solar Cells via a Multifunctional Crystallization Regulating Passivation AdditiveAdvanced Materials, 2025
- Achieving >23% Efficiency Perovskite Solar Minimodules with Surface Conductive Coordination PolymerAdvanced Materials, 2025
- A Soft Nonpolar‐Soluble Two‐Dimensional Perovskite for General Construction of Mixed‐Dimensional HeterojunctionsAdvanced Materials, 2025
- Tailored Colloidal Shapes in Precursor Solutions for Efficient Blade‐Coated Perovskite Solar ModulesAdvanced Materials, 2025
- Visualizing Performances Losses of Perovskite Solar Cells and Modules: From Laboratory to Industrial ScalesAdvanced Energy Materials, 2024
- A Polymeric Hole Transporter with Dual‐Interfacial Interactions Enables 25%‐Efficiency Blade‐Coated Perovskite Solar CellsAdvanced Materials, 2024
- Surface Engineering of Tin Oxide Nanoparticles by pH Modulation Facilitates Homogeneous Film Formation for Efficient Perovskite Solar ModulesAdvanced Energy Materials, 2024
- Efficient and Stable Perovskite Solar Modules Enabled by Inhibited Escape of Volatile SpeciesAdvanced Materials, 2023
- On the Origin of the Ideality Factor in Perovskite Solar CellsAdvanced Energy Materials, 2020