Effects of deposition temperature on Mo/SiC Schottky contacts
Authors:
Open Access
- 1 February 2022
- journal article
- conference paper
- Published by AIP Publishing in AIP Advances
- Vol. 12 (2) , 025117
Abstract
We report on the results of our investigation of the effect of deposition temperature on molybdenum (Mo) used as Schottky contacts to fabricate silicon carbide (SiC) Schottky barrier diodes. The contacts were deposited using magnetron sputtering on n-type 4H-SiC at temperatures ranging from 25 to 900 °C. The fabricated diodes were characterized by current–voltage, current–voltage–temperature, and capacitance–voltage measurements. The diodes showed average Schottky barrier heights that decreased from 1.54 to 1.00 eV with increasing deposition temperature of the contacts. The average values of the ideality factors similarly decreased from 1.21 to 1.06 with increasing deposition temperature. However, the diodes with contacts deposited at 400–900 °C nearly maintained a constant ideality factor value of 1.06. The x-ray diffraction analysis indicated that silicides were formed at the interface for contacts deposited at or above 400 °C. The improved properties of the diodes with contacts deposited at higher temperatures are correlated with the formation of the interfacial alloys possessing improved electrical properties. This work demonstrates that high temperature deposition is another method for optimizing the properties of Mo contacts for the fabrication of 4H-SiC Schottky diodes for electronic applications in high power and high temperature environments.Keywords
This publication has 24 references indexed in Scilit:
- Barrier Inhomogeneities of a Medium Size Mo/4H-SiC Schottky DiodeMaterials Science Forum, 2012
- Improved Ni Schottky Contacts on n-Type 4H-SiC Using Thermal ProcessingJournal of Electronic Materials, 2009
- Barrier inhomogeneities of tungsten Schottky diodes on 4H-SiCSemiconductor Science and Technology, 2008
- Improvement of the Reverse Characteristics of Ti/4H-SiC Schottky Barrier Diodes by Thermal TreatmentsSolid State Phenomena, 2007
- Improved Schottky Contacts on n-Type 4H-SiC Using ZrB2 Deposited at High TemperaturesJournal of Electronic Materials, 2007
- On the electron affinity of silicon carbide polytypesSemiconductors, 2007
- Tailoring the Ti∕4H–SiC Schottky barrier by ion irradiationApplied Physics Letters, 2004
- Molybdenum applications in the electronics marketJOM, 2000
- Solid State Reaction of Mo on Cubic and Hexagonal SiCJapanese Journal of Applied Physics, 1990
- Composition, microstructure, and properties of crystalline molybdenum silicide thin films produced by annealing of amorphous Mo/Si multilayersJournal of Applied Physics, 1988